scholarly journals Plasticizing effect of biodegradable dipropylene glycol bibenzoate and epoxidized linseed oil on diglycidyl ether of bisphenol A based epoxy resin

2021 ◽  
Vol 138 (28) ◽  
pp. 50661
Author(s):  
Chinedu Okoro ◽  
Zaheeruddin Mohammed ◽  
Shaik Jeelani ◽  
Vijaya Rangari
Keyword(s):  
Bisphenol A ◽  
Epoxy Resin ◽  
Linseed Oil ◽  
Diglycidyl Ether ◽  
Dipropylene Glycol ◽  
Epoxidized Linseed Oil

Diglycidyl ether of bisphenol-A epoxy resin modified using poly(ether ether ketone) with pendenttert-butyl groups

2007 ◽  
Vol 45 (17) ◽  
pp. 2481-2496 ◽  
Author(s):  
Bejoy Francis ◽  
Sabu Thomas ◽  
R. Sadhana ◽  
Nicole Thuaud ◽  
R. Ramaswamy ◽  
...  
Keyword(s):  
Bisphenol A ◽  
Epoxy Resin ◽  
Diglycidyl Ether ◽  
Ether Ether Ketone ◽  
Poly Ether Ether Ketone ◽  
Ether Ketone

scholarly journals Preparation and Characterization of Green Epoxy Resin Composites and Its Use in Corrosion Resistance

2018 ◽  
Author(s):  
Abbas Hassan Faris
Keyword(s):  
Bisphenol A ◽  
Epoxy Resin ◽  
Electrolyte Solutions ◽  
Kraft Lignin ◽  
Diglycidyl Ether ◽  
Kraft Pulping ◽  
Palm Tree ◽  
Scanning Calorimetry ◽  
Ft Ir ◽  
Nano Titanium Dioxide

In this work, appropriate alternative for diglycidyl ether bisphenol A (DGEBA) was found to avoid the destructive effects of bisphenol A. Lignin, an aromatic compound from palm tree leaves, was used as a renewable material to synthesize a bio-based epoxy resin. Lignin extracted using Kraft pulping process. Kraft Lignin was epoxidized with epichlorohydrin in alkaline medium. Nano-titanium dioxide was used as filler with ratio of 10% to prepare the green epoxy composite. The structure of the Kraft lignin and lignin-based epoxy resin was proven via Infrared spectra (FT-IR) were recorded using solid KBr disk by testing Shimadzu (FT-IR-8300) spectrophotometer. The thermal properties of the curing process of lignin-based epoxy resin and composite were investigate using Differential scanning calorimetry (DSC) analysis. Potentiodynamic measurements data revealed that the anti-corrosion performance of the lignin based epoxy resin. The study demonstrates successful of epoxidation of Kraft lignin. In addition, lignin based eopxy resin showed effective inhibitor for carbon steel in 3.5 wt. % NaCl electrolyte solutions

scholarly journals Sustainable access to fully biobased epoxidized vegetable oil thermoset materials prepared by thermal or UV-cationic processes

RSC Advances ◽  
2020 ◽  
Vol 10 (68) ◽  
pp. 41954-41966 ◽  
Author(s):  
Samuel Malburet ◽  
Chiara Di Mauro ◽  
Camilla Noè ◽  
Alice Mija ◽  
Marco Sangermano ◽  
...  
Keyword(s):  
Bisphenol A ◽  
Epoxy Resin ◽  
Vegetable Oil ◽  
Epoxy Resins ◽  
Diglycidyl Ether

Beyond the need to find a non-toxic alternative to DiGlycidyl Ether of Bisphenol-A (DGEBA), the serious subject of non-epichlorohydrin epoxy resins production remains a crucial challenge that must be solved for the next epoxy resin generations.

scholarly journals Fully Biobased Epoxy Resins from Fatty Acids and Lignin

Molecules ◽  
2020 ◽  
Vol 25 (5) ◽  
pp. 1158 ◽  
Author(s):  
Pablo Ortiz ◽  
Richard Vendamme ◽  
Walter Eevers
Keyword(s):  
Epoxy Resin ◽  
Renewable Resources ◽  
Epoxy Resins ◽  
Linseed Oil ◽  
Tensile Tests ◽  
Present System ◽  
Gravimetric Analysis ◽  
Scanning Calorimetry ◽  
Commodity Chemicals ◽  
Epoxidized Linseed Oil

The use of renewable resources for plastic production is an imperious need for the reduction of the carbon footprint and the transition towards a circular economy. With that goal in mind, fully biobased epoxy resins have been designed and prepared by combining epoxidized linseed oil, lignin, and a biobased diamine derived from fatty acid dimers. The aromatic structures in lignin provide hardness and strength to an otherwise flexible and breakable epoxy resin. The curing of the system was investigated by infrared spectroscopy and differential scanning calorimetry (DSC). The influence of the different components on the thermo-mechanical properties of the epoxy resins was analyzed by DSC, thermal gravimetric analysis (TGA), and tensile tests. As the content of lignin in the resin increases, so does the glass transition, the Young’s modulus, and the onset of thermal degradation. This correlation is non-linear, and the higher the percentage of lignin, the more pronounced the effect. All the components of the epoxy resin being commodity chemicals, the present system provides a realistic opportunity for the preparation of fully biorenewable resins at an industrial scale.

scholarly journals Synthesis of Bisphenol A Based Phosphazene-Containing Epoxy Resin with Reduced Viscosity

Polymers ◽  
2019 ◽  
Vol 11 (12) ◽  
pp. 1914 ◽  
Author(s):  
Kireev ◽  
Bilichenko ◽  
Borisov ◽  
Mu ◽  
Kuznetsov ◽  
...  
Keyword(s):  
Mass Spectrometry ◽  
Bisphenol A ◽  
Epoxy Resin ◽  
31P Nmr ◽  
Diglycidyl Ether ◽  
31P Nmr Spectroscopy ◽  
Reduced Viscosity ◽  
Lower Viscosity ◽  
Curing Agents ◽  
Flame Retardant Properties

Phosphazene-containing epoxy oligomers (PEO) were synthesized by the interaction of hexachlorocyclotriphosphazene (HCP), phenol, and bisphenol A in a medium of excess of epichlorohydrin using potassium carbonate and hydroxide as HCl acceptors with the aim of obtaining a product with lower viscosity and higher phosphazene content. PEOs are mixtures of epoxycyclophosphazene (ECP) and a conventional organic epoxy resin based on bisphenol A in an amount controlled by the ratio of the initial mono- and diphenol. According to 31P NMR spectroscopy, pentasubstituted aryloxycyclotrophosphazene compounds predominate in the ECP composition. The relative content in the ECP radicals of mono- and diphenol was determined by the MALDI-TOF mass spectrometry method. The organic epoxy fraction, according to gas chromatograpy-mass spectrometry (GC-MS), contains 50–70 wt % diglycidyl ether of bisphenol A. PEO resins obtained in the present work have reduced viscosity when compared to other known phosphazene-containging epoxy resins while phosphazene content is still about 50 wt %. Resins with an epoxy number within 12–17 wt %, are cured by conventional curing agents to form compositions with flame-retardant properties, while other characteristics of these compositions are at the level of conventional epoxy materials.

scholarly journals Synthesis and Characterization of Nanostructured Blends of Epoxy Resin and Block Copolymers

2013 ◽  
Vol 13 (1) ◽  
pp. 81-88 ◽  
Author(s):  
Rajesh Pandit ◽  
Albrecht Berkessel ◽  
Ralf Lach ◽  
Wolfgang Grellmann ◽  
Rameshwar Adhikari
Keyword(s):  
Fourier Transform ◽  
Block Copolymer ◽  
Block Copolymers ◽  
Bisphenol A ◽  
Epoxy Resin ◽  
Layered Silicate ◽  
Diglycidyl Ether ◽  
Synthesis And Characterization ◽  
Microindentation Technique

Polystyrene–polybutadiene block copolymers having different molecular architectures were epoxidized by using meta-chloroperoxybenzoic acid (MCPBA). Then, the blends with epoxy resin (diglycidyl ether of bisphenol-A; DGEBA) and their nanocomposites with boehmite and layered silicate nanofiller in presence of methylene dianiline (MDA) as a hardener were prepared. The epoxidized copolymers and the composites were characterized by Fourier transform infrared (FTIR) spectroscopy and microindentation technique. In this way, it was possible to tune the morphology of the nanostructured blends of the epoxy resin using the functionalized block copolymer as the template. The presence of nanostructured morphology was attested by the optical transparency of the blends as well as of the composites with nanofiller. The microhardness properties were improved by the incorporation of the nanoparticles, viz. boehmite and layered silicate. Nepal Journal of Science and Technology Vol. 13, No. 1 (2012) 81-88 DOI: http://dx.doi.org/10.3126/njst.v13i1.7445

Sign in / Sign up

Export Citation Format

Share Document