Fabrication and characterization of poly(vinylidene fluoride)–polytetrafluoroethylene composite membrane for CO 2 absorption in gas–liquid contacting process

2019 ◽  
Vol 136 (28) ◽  
pp. 47767 ◽  
Author(s):  
Mengfan Du ◽  
Huijuan Gong ◽  
Honglei Pang ◽  
Qi Shen ◽  
Zezhi Chen
Keyword(s):  
Composite Membrane ◽  
Vinylidene Fluoride ◽  
Poly Vinylidene Fluoride ◽  
Fabrication And Characterization

Fabrication and Characterization of Ferroelectric Polymer/TiO2/Al-doped ZnO Structures

2008 ◽  
Vol 1071 ◽  
Author(s):  
Koji Aizawa
Keyword(s):  
Leakage Current ◽  
Vinylidene Fluoride ◽  
Ferroelectric Properties ◽  
Hysteresis Loops ◽  
Tio2 Films ◽  
Gate Leakage Current ◽  
Poly Vinylidene Fluoride ◽  
Doped Zno ◽  
Fabrication And Characterization

AbstractCharacterization of 700-nm-thick poly(vinylidene fluoride/trifluoroethylene) [P(VDF/TrFE)]/TiO2/Al-doped ZnO (AZO) structures on a glass substrate were investigated. In this study, the sputtered TiO2 films as insulator were used for the reduction of leakage current. The leakage current density of the fabricated Pt/P(VDF/TrFE)/AZO and Pt/P(VDF/TrFE)/170-nm-thick TiO2/AZO structures were approximately 8.7 and 3.9 nA/cm2 at the applied voltage of 10 V, respectively. In the polarization vs. voltage characteristics, the fabricated Pt/P(VDF/TrFE)/TiO2/AZO structures showed hysteresis loops caused by ferroelectric polarization. The remnant polarization (2Pr) and coercive voltage (2Vc) measured from a saturated hysteresis loop at the frequency of 50 Hz were approximately 12 μC/cm2 and 105 V, respectively. These results suggest that the insertion of TiO2 film is available for reducing the gate leakage current without changing the ferroelectric properties.

Fabrication and Characterization of Polyvinylidene Fluoride Microfilms for Microfluidic Applications

2016 ◽  
Vol 15 (05n06) ◽  
pp. 1660013
Author(s):  
Yammani Venkat Subba Rao ◽  
Aravinda Narayanan Raghavan ◽  
Meenakshi Viswanathan
Keyword(s):  
Spin Coating ◽  
Polyvinylidene Fluoride ◽  
Vinylidene Fluoride ◽  
Microstructural Properties ◽  
Average Roughness ◽  
Microfluidic Mixer ◽  
Poly Vinylidene Fluoride ◽  
Fabrication And Characterization ◽  
Microfluidic Mixers

The ability to create patterns of piezo responsive material on smooth substrate is an important method to develop efficient microfluidic mixers. This paper reports the fabrication of Poly vinylidene fluoride microfilms using spin-coating on smooth glass surface. The suitable crystalline phases, surface morphology and microstructural properties of the PVDF films have been investigated. We found that films of average thickness 10[Formula: see text][Formula: see text]m, had average roughness of 0.13[Formula: see text][Formula: see text]m. These PVDF films are useful in microfluidic mixer applications.

Preparation and characterization of novel spica-like hierarchical vaterite calcium carbonate and a hydrophilic poly(vinylidene fluoride)/calcium carbonate composite membrane

CrystEngComm ◽  
2014 ◽  
Vol 16 (24) ◽  
pp. 5198-5205 ◽  
Author(s):  
Ao-Xuan Wang ◽  
De-Qing Chu ◽  
Li-Min Wang ◽  
Bao-Guang Mao ◽  
Hong-Ming Sun ◽  
...  
Keyword(s):  
Calcium Carbonate ◽  
Composite Membrane ◽  
Vinylidene Fluoride ◽  
Poly Vinylidene Fluoride

Spica-like hierarchical vaterite CaCO3 and a hydrophilic PVDF/CaCO3 composite membrane were prepared.

Sign in / Sign up

Export Citation Format

Share Document