Self-supporting-film from starch, poly(vinyl alcohol), and glutaraldehyde: Optimization of composition using response surface methodology

2016 ◽  
Vol 134 (6) ◽  
Author(s):  
Chandani Sen ◽  
Madhusweta Das
Keyword(s):  
Response Surface Methodology ◽  
Response Surface ◽  
Vinyl Alcohol ◽  
Poly Vinyl Alcohol ◽  
Optimization Of Composition

scholarly journals Development of poly(vinyl alcohol)-based membranes by the response surface methodology for environmental applications

2020 ◽  
Vol 24 ◽  
pp. e5
Author(s):  
Juliana Zanol Merck ◽  
Camila Suliani Raota ◽  
Jocelei Duarte ◽  
Camila Baldasso ◽  
Janaina Da Silva Crespo ◽  
...  
Keyword(s):  
Response Surface Methodology ◽  
Citric Acid ◽  
Response Surface ◽  
Acid Concentration ◽  
Vinyl Alcohol ◽  
Membrane Preparation ◽  
Poly Vinyl Alcohol ◽  
Esterification Reaction ◽  
Citric Acid Concentration ◽  
Ft Ir

The pollution of hydric sources by pharmaceuticals is an issue in many countries, particularly in Brazil. The presence of these substances causes deleterious effects on the environment and human health. One of the main sources of this contamination is domestic sewage, due to the expressive amount of medicines released in their unaltered form. Unfortunately, traditional wastewater treatment is not effective for the removal of pharmaceuticals and, for this reason, membrane technology is an attractive alternative to overcome this issue. In this regard, hydrophilic polymers, such as poly(vinyl alcohol) (PVA), are the most suitable. However, their high affinity with water causes intense swelling, leading to severe modifications in the membrane properties. In view of all these facts, the present work evaluated the swelling of PVA-based membranes, with the aim of finding the membrane preparation method that has the lowest swelling, thereby providing the most suitable characteristics for pharmaceutical removal from wastewater. The membranes were prepared by the casting of a polymeric solution, with PVA as a basis polymer, citric acid as a crosslink agent and glycerol and silver nanoparticles as performance additives. The process optimization was performed using a design of experiments with posterior analysis by the response surface methodology (RSM). The RSM assessed the effect on the membrane swelling of the factors, including citric acid concentration and the time and temperature of crosslinking. The membrane characterization was performed by Fourier-transform infrared (FT-IR) spectroscopy, scanning electron microscopy coupled with a field emission gun (SEM-FEG) and water contact angle (WCA) measurements. Overall, the condition that showed the lowest swelling was obtained with 10% of citric acid and crosslinking for 4 h at 130 °C. Under these conditions, the membrane had a mass swelling of 42% and a dimensional swelling of 24%. Additionally, our statistical analysis revealed that the factors with the dominant effects were the citric acid concentration and the temperature of crosslinking. The FT-IR analysis suggested that the crosslinking occurred by an esterification reaction, as showed by the stretching frequencies of C=O at 1710 cm-1 and ester C-O at 1230 cm-1. Moreover, the SEM-FEG images revealed a smooth and flat surface and a dense cross section with a thickness of ~113 μm. Concerning the WCA, the angle was at ~80°, which is characteristic of hydrophilic materials. Finally, the data suggested that it is possible to optimize the membrane preparation process with adequate properties so that it can be subsequently applied to the removal of pharmaceuticals from hospital wastewater.

Controlled sulfation of poly(vinyl alcohol) for biological and technical applications using response surface methodology

2020 ◽  
Vol 5 (10) ◽  
pp. 1671-1678
Author(s):  
Laleh Solhi ◽  
He Song Sun ◽  
Sailesh Haresh Daswani ◽  
Christopher M. K. Springate ◽  
Harry Brumer
Keyword(s):  
Response Surface Methodology ◽  
Design Of Experiments ◽  
Response Surface ◽  
Vinyl Alcohol ◽  
Poly Vinyl Alcohol

Sulfated poly(vinyl alcohol) has diverse applications in chemistry and biology. Here, design-of-experiments methodology was used to produce SPVA variants with controlled degrees-of-sulfation as potential fucoidan mimics.

Carvacrol-loaded liposomes suspension: Optimization, characterization and incorporation into poly (vinyl alcohol) films

2021 ◽  
Author(s):  
Adassa Gama Tavares ◽  
Johana Carolina Andrade Chapal ◽  
Rafael Resende Assis Silva ◽  
Clara Suprani Marques ◽  
José Osvaldo Ramos da Silva ◽  
...  
Keyword(s):  
Response Surface Methodology ◽  
Response Surface ◽  
Vinyl Alcohol ◽  
Food Preservation ◽  
Poly Vinyl Alcohol

The purpose of this study was to encapsulate carvacrol in liposomes in order to promote its application in food preservation. Response surface methodology was used to evaluate the effect of...

Sign in / Sign up

Export Citation Format

Share Document