Real-time property prediction for an industrial rubber-mixing process with probabilistic ensemble Gaussian process regression models

2014 ◽  
Vol 132 (6) ◽  
pp. n/a-n/a ◽  
Author(s):  
Yi Liu ◽  
Zengliang Gao
Keyword(s):  
Gaussian Process ◽  
Real Time ◽  
Regression Models ◽  
Gaussian Process Regression ◽  
Mixing Process ◽  
Property Prediction ◽  
Time Property ◽  
Industrial Rubber

Multiscale Topology Optimization With Gaussian Process Regression Models

2021 ◽  
Author(s):  
Joel C. Najmon ◽  
Homero Valladares ◽  
Andres Tovar
Keyword(s):  
Topology Optimization ◽  
Gaussian Process ◽  
Regression Models ◽  
Computational Cost ◽  
Gaussian Process Regression ◽  
Analytical Sensitivity ◽  
Inverse Homogenization ◽  
Discrete Location ◽  
Unit Cells ◽  
Periodic Microstructures

Abstract Multiscale topology optimization (MSTO) is a numerical design approach to optimally distribute material within coupled design domains at multiple length scales. Due to the substantial computational cost of performing topology optimization at multiple scales, MSTO methods often feature subroutines such as homogenization of parameterized unit cells and inverse homogenization of periodic microstructures. Parameterized unit cells are of great practical use, but limit the design to a pre-selected cell shape. On the other hand, inverse homogenization provide a physical representation of an optimal periodic microstructure at every discrete location, but do not necessarily embody a manufacturable structure. To address these limitations, this paper introduces a Gaussian process regression model-assisted MSTO method that features the optimal distribution of material at the macroscale and topology optimization of a manufacturable microscale structure. In the proposed approach, a macroscale optimization problem is solved using a gradient-based optimizer The design variables are defined as the homogenized stiffness tensors of the microscale topologies. As such, analytical sensitivity is not possible so the sensitivity coefficients are approximated using finite differences after each microscale topology is optimized. The computational cost of optimizing each microstructure is dramatically reduced by using Gaussian process regression models to approximate the homogenized stiffness tensor. The capability of the proposed MSTO method is demonstrated with two three-dimensional numerical examples. The correlation of the Gaussian process regression models are presented along with the final multiscale topologies for the two examples: a cantilever beam and a 3-point bending beam.

Gaussian Process Regression Models for the Prediction of Hydrogen Bond Acceptor Strengths

2018 ◽  
Vol 38 (4) ◽  
pp. 1800115 ◽  
Author(s):  
Christoph A. Bauer ◽  
Gisbert Schneider ◽  
Andreas H. Göller
Keyword(s):  
Hydrogen Bond ◽  
Gaussian Process ◽  
Regression Models ◽  
Gaussian Process Regression ◽  
Hydrogen Bond Acceptor

scholarly journals A Vision-Based Approach for Sidewalk and Walkway Trip Hazards Assessment

2020 ◽  
Vol 17 (22) ◽  
pp. 8438
Author(s):  
Rachel Cohen ◽  
Geoff Fernie ◽  
Atena Roshan Fekr
Keyword(s):  
Environmental Factors ◽  
Edge Detection ◽  
Gaussian Process ◽  
Regression Models ◽  
Gaussian Process Regression ◽  
Region Growing ◽  
Cost Effective ◽  
Second Phase ◽  
Cost Effective Method ◽  
Regression Techniques

Tripping hazards on the sidewalk cause many falls annually, and the inspection and repair of these hazards cost cities millions of dollars. Currently, there is not an efficient and cost-effective method to monitor the sidewalk to identify any possible tripping hazards. In this paper, a new portable device is proposed using an Intel RealSense D415 RGB-D camera to monitor the sidewalks, detect the hazards, and extract relevant features of the hazards. This paper first analyzes the effects of environmental factors contributing to the device’s error and compares different regression techniques to calibrate the camera. The Gaussian Process Regression models yielded the most accurate predictions with less than 0.09 mm Mean Absolute Errors (MAEs). In the second phase, a novel segmentation algorithm is proposed that combines the edge detection and region-growing techniques to detect the true tripping hazards. Different examples are provided to visualize the output results of the proposed method.

scholarly journals Ensemble Just-In-Time Learning-Based Soft Sensor for Mooney Viscosity Prediction in an Industrial Rubber Mixing Process

2020 ◽  
Vol 2020 ◽  
pp. 1-14
Author(s):  
Huaiping Jin ◽  
Jiangang Li ◽  
Meng Wang ◽  
Bin Qian ◽  
Biao Yang ◽  
...  
Keyword(s):  
Gaussian Process Regression ◽  
Soft Sensor ◽  
Viscosity Measurement ◽  
Finite Mixture ◽  
Just In Time ◽  
Mixing Process ◽  
Industrial Rubber ◽  
Viscosity Prediction ◽  
Mooney Viscosity ◽  
Input Variables

The lack of online sensors for Mooney viscosity measurement has posed significant challenges for enabling efficient monitoring, control, and optimization of industrial rubber mixing process. To obtain real-time and accurate estimations of Mooney viscosity, a novel soft sensor method, referred to as multimodal perturbation- (MP-) based ensemble just-in-time learning Gaussian process regression (MP-EJITGPR), is proposed by exploiting ensemble JIT learning. This method employs perturbations on similarity measure and input variables for generating the diversity of JIT learners. Furthermore, a set of accurate and diverse JIT learners are built through an evolutionary multiobjective optimization by balancing the accuracy and diversity objectives explicitly. Moreover, all base JIT learners are combined adaptively using a finite mixture mechanism. The proposed method is applied to an industrial rubber mixing process for Mooney viscosity prediction, and the experimental results demonstrate its effectiveness and superiority over traditional soft sensor methods.

scholarly journals Parameterization of wind evolution using lidar

2021 ◽  
Vol 6 (1) ◽  
pp. 61-91
Author(s):  
Yiyin Chen ◽  
David Schlipf ◽  
Po Wen Cheng
Keyword(s):  
Gaussian Process ◽  
Wind Field ◽  
Regression Models ◽  
Gaussian Process Regression ◽  
Evolution Model ◽  
Model Parameters ◽  
Turbulence Structures ◽  
Wind Turbine Control ◽  
Automatic Relevance Determination ◽  
Control Concept

Abstract. Wind evolution, i.e., the evolution of turbulence structures over time, has become an increasingly interesting topic in recent years, mainly due to the development of lidar-assisted wind turbine control, which requires accurate prediction of wind evolution to avoid unnecessary or even harmful control actions. Moreover, 4D stochastic wind field simulations can be made possible by integrating wind evolution into standard 3D simulations to provide a more realistic simulation environment for this control concept. Motivated by these factors, this research aims to investigate the potential of Gaussian process regression in the parameterization of wind evolution. Wind evolution is commonly quantified using magnitude-squared coherence of wind speed and is estimated with lidar data measured by two nacelle-mounted lidars in this research. A two-parameter wind evolution model modified from a previous study is used to model the estimated coherence. A statistical analysis is done for the wind evolution model parameters determined from the estimated coherence to provide some insights into the characteristics of wind evolution. Gaussian process regression models are trained with the wind evolution model parameters and different combinations of wind-field-related variables acquired from the lidars and a meteorological mast. The automatic relevance determination squared exponential kernel function is applied to select suitable variables for the models. The performance of the Gaussian process regression models is analyzed with respect to different variable combinations, and the selected variables are discussed to shed light on the correlation between wind evolution and these variables.

Sign in / Sign up

Export Citation Format

Share Document