Effect of the crosslinking density and programming temperature on the shape fixity and shape recovery in epoxy-anhydride shape-memory polymers

2014 ◽  
Vol 131 (15) ◽  
pp. n/a-n/a ◽  
Author(s):  
Xue Lian Wu ◽  
Shu Feng Kang ◽  
Xiao Jing Xu ◽  
Feng Xiao ◽  
Xiao Lan Ge
Keyword(s):  
Shape Memory ◽  
Shape Recovery ◽  
Shape Memory Polymers ◽  
Crosslinking Density ◽  
Shape Fixity

scholarly journals Bio-Based Epoxy Shape-Memory Thermosets from Triglycidyl Phloroglucinol

Polymers ◽  
2020 ◽  
Vol 12 (3) ◽  
pp. 542 ◽  
Author(s):  
David Santiago ◽  
Dailyn Guzmán ◽  
Francesc Ferrando ◽  
Àngels Serra ◽  
Silvia De la Flor
Keyword(s):  
Shape Memory ◽  
Shape Recovery ◽  
Memory Performance ◽  
Crosslinking Agent ◽  
Shape Memory Polymers ◽  
Crosslinking Density ◽  
Mechanical Analysis ◽  
Diglycidyl Ether ◽  
Partial Substitution ◽  
Scanning Calorimetry

A series of bio-based epoxy shape-memory thermosetting polymers were synthesized starting from a triglycidyl phloroglucinol (3EPOPh) and trimethylolpropane triglycidyl ether (TPTE) as epoxy monomers and a polyetheramine (JEF) as crosslinking agent. The evolution of the curing process was studied by differential scanning calorimetry (DSC) and the materials obtained were characterized by means of DSC, thermogravimetric analysis (TGA), dynamic mechanical analysis (DMA), stress-strain tests, and microindentation. Shape-memory properties were evaluated under free and totally constrained conditions. All results were compared with an industrial epoxy thermoset prepared from standard diglycidyl ether of Bisphenol A (DGEBA). Results revealed that materials prepared from 3EPOPh were more reactive and showed a tighter network with higher crosslinking density and glass transition temperatures than the prepared from DGEBA. The partial substitution of 3EPOPh by TPTE as epoxy comonomer caused an increase in the molecular mobility of the materials but without worsening the thermal stability. The shape-memory polymers (SMPs) prepared from 3EPOPh showed good mechanical properties as well as an excellent shape-memory performance. They showed almost complete shape-recovery and shape-fixation, fast shape-recovery rates, and recovery stress up to 7 MPa. The results obtained in this study allow us to conclude that the triglycidyl phloroglucinol derivative of eugenol is a safe and environmentally friendly alternative to DGEBA for preparing thermosetting shape-memory polymers.

scholarly journals The Influence of Water and Solvent Uptake on Functional Properties of Shape-Memory Polymers

2018 ◽  
Vol 2018 ◽  
pp. 1-15 ◽  
Author(s):  
Ehsan Ghobadi ◽  
Axel Marquardt ◽  
Elias Mahmoudinezhad Zirdehi ◽  
Klaus Neuking ◽  
Fathollah Varnik ◽  
...  
Keyword(s):  
Shape Memory ◽  
Shape Recovery ◽  
Shape Memory Polymers ◽  
Holding Time ◽  
Fickian Diffusion ◽  
Recovery Ratio ◽  
Solvent Uptake ◽  
Time Shape ◽  
Influence Of Water ◽  
Shape Fixity

In this contribution, diffusion of water, acetone, and ethanol into a polymer matrix has been studied experimentally and numerically by finite element approaches. Moreover, the present study reports an assessment of different thermomechanical conditions of the shape-memory (SM) performance, for example, stress- or strain-holding times in stress- or strain-controlled thermomechanical cycles and the effect of maximum strain. According to the results presented here, the uptake of acetone in Estane is much higher than ethanol and follows classical Fickian diffusion. Further, a series of thermomechanical measurements conducted on dry and physically (hydrolytically) aged polyether urethanes revealed that incorporation of water seems to have an appreciable impact on the shape recovery ratios which can be attributed to the additional physical crosslinks. However, no obvious difference in shape fixation of dry and physically (hydrolytically) aged samples could be recognized. Furthermore, by decreasing the strain-holding time, shape recovery improves significantly. Moreover, the shape fixity is found to be independent of holding time. The shape recovery ratio decreased dramatically with an increase in the stress-holding time.

High-Strain Shape-Memory Properties of Poly(Carbonate-Urea-Urethane)s Based on Aliphatic Oligocarbonates and L-Lysine Diisocyanate

MRS Advances ◽  
2017 ◽  
Vol 2 (47) ◽  
pp. 2529-2536
Author(s):  
Magdalena Mazurek-Budzyńska ◽  
Muhammad Y. Razzaq ◽  
Gabriel Rokicki ◽  
Marc Behl ◽  
Andreas Lendlein
Keyword(s):  
Shape Memory ◽  
Medical Devices ◽  
Shape Recovery ◽  
High Strain ◽  
Shape Memory Polymers ◽  
Interesting Candidate ◽  
Degradable Biomaterials ◽  
Precursor Route ◽  
Shape Fixity ◽  
Poly Carbonate

ABSTRACTThe simultaneous capability of high-strain deformation and high shape recovery ratio constitutes a great challenge in design of the shape-memory polymers. Here we report on poly(carbonate-urea-urethane)s (PCUUs) synthesized by a precursor route, based on oligo(alkylene carbonate) diols, L-lysine diisocyanate (LDI), and water vapor. When programed with a strain of εprog = 800%, the PCUU networks exhibited a one-way shape-memory effect (1W-SME) with excellent shape fixity (> 97%) and shape recovery (> 99%) ratios. The switching temperatures (Tsw) varied between 50 and 56 °C and correlated to the melting transitions of the switching domains. The obtained PCUUs capable of high-strain are interesting candidate materials for degradable biomaterials as required in smart medical devices.

scholarly journals Effect of PEW and CS on the Thermal, Mechanical, and Shape Memory Properties of UHMWPE

Polymers ◽  
2020 ◽  
Vol 12 (2) ◽  
pp. 483
Author(s):  
Run Zhang ◽  
Suwei Wang ◽  
Jing Tian ◽  
Ke Chen ◽  
Ping Xue ◽  
...  
Keyword(s):  
Shape Memory ◽  
Shape Recovery ◽  
Shape Memory Polymers ◽  
Effect Of Temperature ◽  
Comprehensive Performance ◽  
Shape Memory Properties ◽  
Polyethylene Wax ◽  
Entanglement Network ◽  
Ultra High Molecular Weight ◽  
Shape Fixity

Modified ultra-high-molecular-weight polyethylene (UHMWPE) with calcium stearate (CS) and polyethylene wax (PEW) is a feasible method to improve the fluidity of materials because of the tense entanglement network formed by the extremely long molecular chains of UHMWPE, and a modified UHMWPE sheet was fabricated by compression molding technology. A Fourier-transform infrared spectroscopy test found that a new chemical bond was generated at 1097 cm−1 in the materials. Besides, further tests on the thermal, thermomechanical, mechanical, and shape memory properties of the samples were also conducted, which indicates that all properties are affected by the dimension and distribution of crystal regions. Moreover, the experimental results indicate that the addition of PEW and CS can effectively improve the mechanical properties. Additionally, the best comprehensive performance of the samples was obtained at the PEW content of 5 wt % and the CS content of 1 wt %. In addition, the effect of temperature on the shape memory properties of the samples was investigated, and the results indicate that the shape fixity ratio (Rf) and the shape recovery ratio (Rr) can reach 100% at 115 °C and 79% at 100 °C, respectively, which can contribute to the development of UHMWPE-based shape memory polymers.

Effects of graphene nanoplatelets on bio-based shape memory polymers from benzoxazine/epoxy copolymers actuated by near-infrared light

2021 ◽  
pp. 1045389X2110235
Author(s):  
Surapong Srisaard ◽  
Lunjakorn Amornkitbamrung ◽  
Krittapas Charoensuk ◽  
Chaweewan Sapcharoenkun ◽  
Chanchira Jubsilp ◽  
...  
Keyword(s):  
Shape Memory ◽  
Shape Recovery ◽  
Near Infrared ◽  
Shape Memory Polymers ◽  
Graphene Nanoplatelets ◽  
Dynamic Mechanical ◽  
Nir Light ◽  
Uniform Dispersion ◽  
Shape Memory Properties ◽  
Shape Fixity

Novel near-infrared (NIR) light-induced bio-based shape memory polymers (SMPs) were prepared from copolymers of vanillin/furfurylamine-based benzoxazine monomer (V-fa monomer) and epoxidized castor oil (ECO). Incorporation of graphene nanoplatelets (GNPs) as photothermal fillers into the copolymers provided shape memory properties under near-infrared (NIR) light actuation. The effects of GNP content on photothermal, thermal, dynamic mechanical, morphology, and shape memory properties of the bio-based benzoxazine/epoxy copolymers (V-fa/ECO copolymers) were investigated. The results showed that the addition of GNPs significantly improved the photothermal, thermal, and dynamic mechanical properties of the copolymers. The uniform dispersion of 3 wt% GNPs in the V-fa/ECO copolymers resulted in the highest shape memory performance with shape fixity of 92% and shape recovery of 99% upon NIR light actuation. The recovery time decreased with the increment of GNP content, and the V-fa/ECO copolymers filled with GNPs displayed good execution in the repeated fold-deploy, in which the shape fixity and shape recovery values were close to the original specimen. Therefore, the outstanding properties of V-fa/ECO copolymers filled with GNPs had a potential to be excellent SMPs under NIR actuation.

Preparation of porous structures with shape memory properties from biodegradable polymeric networks

2012 ◽  
Vol 1403 ◽  
Author(s):  
Shahriar Sharifi ◽  
Sebastien Blanquer ◽  
Dirk W. Grijpma
Keyword(s):  
Shape Memory ◽  
Shape Recovery ◽  
Soft Tissues ◽  
Shape Memory Polymers ◽  
Porous Structures ◽  
Trimethylene Carbonate ◽  
Polymeric Networks ◽  
Shape Memory Properties ◽  
Crosslinked Networks ◽  
Shape Fixity

ABSTRACTPreparing porous biodegradable structures from shape memory polymers can combine the structure-defining properties of porous structures with the minimally invasive implanting possibilities of shape memory polymers. In this study, porous biodegradable shape memory structures were prepared using photo-crosslinked networks based on poly(D,L-lactide-co-trimethylene carbonate). The characteristic shape memory properties of the structures, such as their shape fixity at a low temperature of 0 oC and their full shape recovery upon heating to physiological temperatures, were excellent. This makes these biodegradable and biocompatible structures very well-suited for use as self-deploying implants in medical applications like tissue engineering, drug delivery and the support of soft tissues.

scholarly journals Water Triggered Shape Memory Materials

2013 ◽  
Vol 3 (1) ◽  
pp. 49-50 ◽  
Author(s):  
Guoguang Niu
Keyword(s):  
Shape Memory ◽  
Shape Recovery ◽  
Shape Memory Polymers ◽  
Electrical Current ◽  
Light Illumination ◽  
Poly Ethylene Glycol ◽  
Thermally Induced ◽  
Permanent Shape ◽  
Poly Ethylene ◽  
Novel Strategy

The term "shape memory effect" refers to the ability of a material to be deformed and fixed into a temporary shape, and to recover its original, permanent shape upon an external stimulus (1). Shape memory polymers have attracted much interest because of their unique properties, and applied tremendously in medical area, such as biodegradable sutures, actuators, catheters and smart stents (2, 3). Shape memory usually is a thermally induced process, although it can be activated by light illumination, electrical current, magnetic, or electromagnetic field (4-6). During the process, the materials are heated directly or indirectly above their glass transition temperature (Tg) or the melting temperature (Tm) in order to recover the original shape. Non-thermally induced shape memory polymers eliminate the temperature constrains and enable the manipulation of the shape recovered under ambient temperature (7, 8). Herein, we report a novel strategy of water induced shape memory, in which the formation and dissolution of poly(ethylene glycol) (PEG) crystal is utilized for the fixation and recovery of temporary deformation of hydrophilic polymer. This water-induced shape recovery is less sensitive to temperature, of which 95% deformation is fixed in circumstance and over 75% recovery is reached even at 0 oC.

scholarly journals A Large-Deformation Theory for Thermally-Actuated Shape-Memory Polymers and its Application

2010 ◽  
Author(s):  
Shawn A. Chester ◽  
Vikas Srivastava ◽  
Claudio V. Di Leo ◽  
Lallit Anand
Keyword(s):  
Glass Transition ◽  
Shape Memory ◽  
Deformation Theory ◽  
Shape Recovery ◽  
Large Deformations ◽  
Shape Memory Polymers ◽  
The Body ◽  
Thermally Induced ◽  
Thermally Actuated ◽  
Common Shape

The most common shape-memory polymers are those in which the shape-recovery is thermally-induced. A body made from such a material may be subjected to large deformations at an elevated temperature above its glass transition temperature &Vthgr;g. Cooling the deformed body to a temperature below &Vthgr;g under active kinematical constraints fixes the deformed shape of the body. The original shape of the body may be recovered if the material is heated back to a temperature above &Vthgr;g without the kinematical constraints. This phenomenon is known as the shape-memory effect. If the shape recovery is partially constrained, the material exerts a recovery force and the phenomenon is known as constrained-recovery.

Characristics of Shape Memory Composites Combined with Shape Memory Alloy and Shape Memory Polymer

2013 ◽  
Vol 705 ◽  
pp. 169-172
Author(s):  
Xue Feng ◽  
Li Min Zhao ◽  
Xu Jun Mi
Keyword(s):  
Shape Memory ◽  
Room Temperature ◽  
Shape Recovery ◽  
Volume Fraction ◽  
Shape Memory Polymer ◽  
Young Modulus ◽  
Thermomechanical Properties ◽  
The Matrix ◽  
Shape Memory Composites ◽  
Shape Fixity

In order to develop high functionality of shape memory materials, the shape memory composites combined with TiNi wire and shape memory epoxy were prepared, and the mechanical and thermomechanical properties were studied. The results showed the addition of TiNi wire increased the Young modulus and breaking strength both at room temperature and at elevated temperature. The composites maintained the rates of shape fixity and shape recovery close to 100%. The maximum recovery stress increased with increasing TiNi wire volume fraction, and obtained almost 3 times of the matrix by adding 1vol% TiNi wire.

Deployable Process Analysis of Packaged SMP Sandwich Beam

2010 ◽  
Vol 123-125 ◽  
pp. 943-946 ◽  
Author(s):  
Zheng Fa Li ◽  
Zheng Dao Wang
Keyword(s):  
Shape Memory Alloys ◽  
Shape Memory ◽  
Sandwich Structure ◽  
Shape Recovery ◽  
Process Analysis ◽  
Sandwich Beam ◽  
Shape Memory Polymers ◽  
Recovery Stress ◽  
Recovery Response

Shape memory polymers own many advantages compared with traditional shape memory alloys or ceramics. In order to improve their shape recovery stress and realize a stable recovery response during the deployable process, the structure of SMP sandwich beam composed of two metallic skin and one SMP core is considered. The recovery behaviors of pure SMP and SMP beams reinforced by one-layer metallic skin are also discussed for comparison. The results confirm that the deployable properties of SMP matrix can be significantly improved by using sandwich structure.

Sign in / Sign up

Export Citation Format

Share Document