Enhancement in the thermal and dynamic mechanical properties of high performance liquid crystalline epoxy composites through uniaxial orientation of mesogenic on carbon fiber

2014 ◽  
Vol 131 (12) ◽  
pp. n/a-n/a ◽  
Author(s):  
Huilong Guo ◽  
Mangeng Lu ◽  
Liyan Liang ◽  
Jian Zheng ◽  
Yunfei Zhang ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Carbon Fiber ◽  
High Performance ◽  
Liquid Crystalline ◽  
Dynamic Mechanical Properties ◽  
Epoxy Composites ◽  
Dynamic Mechanical ◽  
Uniaxial Orientation ◽  
Liquid Crystalline Epoxy

Reinforcement in the mechanical properties of shape memory liquid crystalline epoxy composites

2015 ◽  
Vol 132 (40) ◽  
pp. n/a-n/a ◽  
Author(s):  
Huilong Guo ◽  
Yinwen Li ◽  
Jian Zheng ◽  
Jianqun Gan ◽  
Liyan Liang ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Shape Memory ◽  
Liquid Crystalline ◽  
Epoxy Composites ◽  
Liquid Crystalline Epoxy

scholarly journals Evaluation of Dynamic Mechanical Properties of Fique Fabric/Epoxy Composites

2019 ◽  
Vol 22 (suppl 1) ◽  
Author(s):  
Michelle Souza Oliveira ◽  
Fabio da Costa Garcia Filho ◽  
Fernanda Santos da Luz ◽  
Luana Cristyne da Cruz Demosthenes ◽  
Artur Camposo Pereira ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Dynamic Mechanical Properties ◽  
Epoxy Composites ◽  
Dynamic Mechanical

scholarly journals Dynamic Mechanical Properties of Hybrid Layered Silicates/Kaolin Geopolymer Filler in Epoxy Composites

2017 ◽  
Vol 54 (3) ◽  
pp. 543-545 ◽  
Author(s):  
Yusrina Mat Daud ◽  
Kamarudin Hussin ◽  
Azlin Fazlina Osman ◽  
Che Mohd Ruzaidi Ghazali ◽  
Mohd Mustafa Al Bakri Abdullah ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
High Speed ◽  
Hybrid Composites ◽  
Loss Modulus ◽  
Dynamic Mechanical Properties ◽  
Mechanical Analysis ◽  
Layered Silicates ◽  
Epoxy Composites ◽  
Damping Factor ◽  
Dynamic Mechanical

Preparation epoxy based hybrid composites were involved kaolin geopolymer filler, organo-montmorillonite at 3phr by using high speed mechanical stirrer. A mechanical behaviour of neat epoxy, epoxy/organo-montmorillonite and its hybrid composites containing 1-8phr kaolin geopolymer filler was studied upon cyclic deformation (three-point flexion mode) as the temperature is varies. The analysis was determined by dynamic mechanical analysis (DMA) at frequency of 1.0Hz. The results then expressed in storage modulus (E�), loss modulus (E�) and damping factor (tan d) as function of temperature from 40 oC to 130oC. Overall results indicated that E�, E�� and Tg increased considerably by incorporating optimum 1phr kaolin geopolymer in epoxy organo-montmorillonite hybrid composites.

Static and Dynamic Mechanical Properties of Graphene Oxide-Incorporated Woven Carbon Fiber/Epoxy Composite

2018 ◽  
Vol 27 (3) ◽  
pp. 1138-1147 ◽  
Author(s):  
Nitai Chandra Adak ◽  
Suman Chhetri ◽  
Nam Hoon Kim ◽  
Naresh Chandra Murmu ◽  
Pranab Samanta ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Graphene Oxide ◽  
Carbon Fiber ◽  
Epoxy Composite ◽  
Dynamic Mechanical Properties ◽  
Dynamic Mechanical ◽  
Carbon Fiber Epoxy

Thermal stability and dynamic mechanical behavior of functional multiphase boride ceramics/epoxy composites

2019 ◽  
Vol 39 (6) ◽  
pp. 508-514
Author(s):  
Yannan He ◽  
Zhiqiang Yu
Keyword(s):  
Mechanical Properties ◽  
Thermal Stability ◽  
Loss Modulus ◽  
Dynamic Mechanical Properties ◽  
Mechanical Analysis ◽  
Epoxy Composites ◽  
Scanning Calorimetry ◽  
Element Analysis ◽  
Reaction Heat ◽  
Dynamic Mechanical

Abstract The thermal and dynamic mechanical properties of epoxy composites filled with zirconium diboride/nano-alumina (ZrB2/Al2O3) multiphase particles were investigated by means of differential scanning calorimetry, dynamic thermo-mechanical analysis, and numerical simulation. ZrB2/Al2O3 particles were surface organic functional modified by γ-glycidoxypropyltrimethoxysilane for the improvement of their dispersity in epoxy matrix. The results indicated that the curing exotherm of epoxy resin decreased significantly due to the addition of ZrB2/Al2O3 multiphase particles. In comparison to the composites filled with unmodified particles, the modified multiphase particles made the corresponding filling composites exhibit lower curing reaction heat, lower loss modulus, and higher storage modulus. Generally speaking, the composites filled with 5 wt% modified multiphase particles presented the best thermal stability and thermo-mechanical properties due to the better filler-matrix interfacial compatibility and the uniform dispersity of modified particles. Finite element analysis also suggested that the introduction of modified ZrB2/Al2O3 multiphase particles increased the stiffness of the corresponding composites.

Sign in / Sign up

Export Citation Format

Share Document