Effect of wood species on the mechanical and thermal properties of wood-plastic composites

2009 ◽  
Vol 112 (3) ◽  
pp. 1378-1385 ◽  
Author(s):  
Jae-Woo Kim ◽  
David P. Harper ◽  
Adam M. Taylor
Keyword(s):  
Thermal Properties ◽  
Wood Species ◽  
Mechanical And Thermal Properties ◽  
Wood Plastic Composites ◽  
Plastic Composites

Mechanical and thermal properties of wood-plastic composites reinforced with hexagonal boron nitride

2013 ◽  
Vol 35 (1) ◽  
pp. 194-200 ◽  
Author(s):  
Nadir Ayrilmis ◽  
Turker Dundar ◽  
Alperen Kaymakci ◽  
Ferhat Ozdemir ◽  
Jin Heon Kwon
Keyword(s):  
Thermal Properties ◽  
Boron Nitride ◽  
Hexagonal Boron Nitride ◽  
Mechanical And Thermal Properties ◽  
Wood Plastic Composites ◽  
Plastic Composites

Study of Wood Plastic Composites on Mechanical and Thermal Properties after Immersed into Water

2014 ◽  
Vol 1004-1005 ◽  
pp. 497-500
Author(s):  
Wang Wang Yu ◽  
Dong Xue
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Thermal Properties ◽  
High Density Polyethylene ◽  
Nucleating Agent ◽  
Mechanical And Thermal Properties ◽  
Wood Plastic Composites ◽  
Plastic Composites ◽  
Before And After ◽  
Negative Effect

In this study, silvergrass (SV) reinforced high density polyethylene (HDPE) composites were prepared. The effects of slivergrass fibers (SV) content on the mechanical properties, crystalline properties of wood plastic composites (WPCs) before and after water absorption were investigated. It was found that compared with the untreated WPCs after immersed into water, the tensile strength of PMDI treated composites were higher. Silvergrass can be the nucleating agent with treated by PMDI. The Xc of PMDI treated WPCs after immersed into water was also increased. However, this improved Xc has negative effect on mechanical properties.

scholarly journals The Effect of Varying the Amount of Short Hemp Fibers on Mechanical and Thermal Properties of Wood–Plastic Composites from Biobased Polyethylene Processed by Injection Molding

Polymers ◽  
2021 ◽  
Vol 14 (1) ◽  
pp. 138
Author(s):  
Celia Dolçà ◽  
Eduardo Fages ◽  
Eloi Gonga ◽  
David Garcia-Sanoguera ◽  
Rafael Balart ◽  
...  
Keyword(s):  
Thermal Properties ◽  
Injection Molding ◽  
Mechanical Performance ◽  
Natural Fibers ◽  
Mechanical And Thermal Properties ◽  
Standard Samples ◽  
Wood Plastic Composites ◽  
Hemp Fibers ◽  
Plastic Composites ◽  
Twin Screw

Biobased HDPE (bioHDPE) was melt-compounded with different percentages (2.5 to 40.0 wt.%) of short hemp fibers (HF) as a natural reinforcement to obtain environmentally friendly wood plastic composites (WPC). These WPC were melt-compounded using a twin-screw extrusion and shaped into standard samples by injection molding. To improve the poor compatibility between the high non-polar BioHDPE matrix and the highly hydrophilic lignocellulosic fibers, a malleated copolymer, namely, polyethylene-graft-maleic anhydride (PE-g-MA), was used. The addition of short hemp fibers provided a remarkable increase in the stiffness that, in combination with PE-g-MA, led to good mechanical performance. In particular, 40 wt.% HF drastically increased the Young’s modulus and impact strength of BioHDPE, reaching values of 5275 MPa and 3.6 kJ/m2, respectively, which are very interesting values compared to neat bioHDPE of 826 MPa and 2.0 kJ/m2. These results were corroborated by dynamic mechanical thermal analysis (DMTA) results, which revealed a clear increasing tendency on stiffness with increasing the fiber loading over the whole temperature range. The crystal structure was not altered by the introduction of the natural fibers as could be seen in the XRD patterns in which mainly the heights of the main peaks changed, and only small peaks associated with the presence of the fiber appeared. Analysis of the thermal properties of the composites showed that no differences in melting temperature occurred and the non-isothermal crystallization process was satisfactorily described from the combined Avrami and Ozawa model. As for the thermal degradation, the introduction of HF resulted in the polymer degradation taking place at a higher temperature. As for the change in color of the injected samples, it was observed that the increase in fiber generated a clear modification in the final shades of the pieces, reaching colors very similar to dark woods for percentages higher than 20% HF. Finally, the incorporation of an increasing percentage of fibers also increased water absorption due to its lignocellulosic nature in a linear way, which drastically improved the polarity of the composite

scholarly journals Alien Wood Species as a Resource for Wood-Plastic Composites

2020 ◽  
Vol 11 (1) ◽  
pp. 44
Author(s):  
Sergej Medved ◽  
Daša Krapež Tomec ◽  
Angela Balzano ◽  
Maks Merela
Keyword(s):  
Wood Species ◽  
Dimensional Stability ◽  
Laser Scanning ◽  
Large Scale ◽  
Laser Scanning Microscopy ◽  
Raw Material ◽  
Confocal Laser ◽  
Alien Plant ◽  
Wood Plastic Composites ◽  
Plastic Composites

Since invasive alien species are one of the main causes of biodiversity loss in the region and thus of changes in ecosystem services, it is important to find the best possible solution for their removal from nature and the best practice for their usability. The aim of the study was to investigate their properties as components of wood-plastic composites and to investigate the properties of the wood-plastic composites produced. The overall objective was to test the potential of available alien plant species as raw material for the manufacture of products. This would contribute to sustainability and give them a better chance of ending their life cycle. One of the possible solutions on a large scale is to use alien wood species for the production of wood plastic composites (WPC). Five invasive alien hardwood species have been used in combination with polyethylene powder (PE) and maleic anhydride grafted polyethylene (MAPE) to produce various flat pressed WPC boards. Microstructural analyses (confocal laser scanning microscopy and scanning electron microscopy) and mechanical tests (flexural strength, tensile strength) were performed. Furthermore, measurements of density, thickness swelling, water absorption and dimensional stability during heating and cooling were carried out. Comparisons were made between the properties of six WPC boards (five alien wood species and mixed boards). The results showed that the differences between different invasive alien wood species were less obvious in mechanical properties, while the differences in sorption properties and dimensional stability were more significant. The analyses of the WPC structure showed a good penetration of the polymer into the lumens of the wood cells and a fine internal structure without voids. These are crucial conditions to obtain a good, mechanically strong and water-resistant material.

Sign in / Sign up

Export Citation Format

Share Document