Achieving miscible ternary polymer blends with hydrogen bonding

2006 ◽  
Vol 101 (1) ◽  
pp. 643-652 ◽  
Author(s):  
Wen-Ping Hsu
Keyword(s):  
Hydrogen Bonding ◽  
Polymer Blends ◽  
Ternary Polymer

The effect of hydrogen bonding on the phase behaviour of ternary polymer blends

Polymer ◽  
1994 ◽  
Vol 35 (25) ◽  
pp. 5379-5397 ◽  
Author(s):  
Hongxi Zhang ◽  
Dorab E. Bhagwagar ◽  
John F. Graf ◽  
Paul C. Painter ◽  
Michael M. Coleman
Keyword(s):  
Hydrogen Bonding ◽  
Polymer Blends ◽  
Phase Behaviour ◽  
Ternary Polymer

Miscibility Study of Polymer Blends Composed of Polyethylenimine, Polyethyleneglycol, and Carboxymethyl Chitosan

2011 ◽  
Vol 284-286 ◽  
pp. 1707-1712 ◽  
Author(s):  
Yong Sheng Chen ◽  
Jiang Nan Shen ◽  
Jun Hong Qiu
Keyword(s):  
Electron Microscope ◽  
Scanning Electron Microscope ◽  
Polymer Blends ◽  
Carboxymethyl Chitosan ◽  
Dilute Solution ◽  
Poly Ethylene Glycol ◽  
Poly Ethylene ◽  
Ternary Polymer ◽  
Dilute Solution Viscometry ◽  
Scanning Electron

Miscibility of ternary polymer blends composed of poly(ethyleneimine) (PEI), poly(ethylene glycol) (PEG), and carboxymethyl chitosan (CMCS) was investigated by dilute-solution viscometry, FTIR spectrum, and scanning electron microscope (SEM) techniques. The results of these measurements indicate that PEG is immiscible in the ternary CMCS/PEI/PEG polymer blend.

Effect of viscosity in ternary polymer blends displaying partial wetting phenomena

Polymer ◽  
2011 ◽  
Vol 52 (17) ◽  
pp. 3827-3834 ◽  
Author(s):  
Pierre Le Corroller ◽  
Basil D. Favis
Keyword(s):  
Polymer Blends ◽  
Partial Wetting ◽  
Wetting Phenomena ◽  
Ternary Polymer

scholarly journals A Study on the Mechanical Properties for Ternary Polymer Blends

2017 ◽  
Vol 6 (3) ◽  
pp. 27
Author(s):  
Awham M. Hameed
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Compressive Strength ◽  
Polymer Blends ◽  
Hardness Test ◽  
Flexural Behavior ◽  
Ternary Blend ◽  
Mixing Ratios ◽  
Hardness Tests ◽  
Ternary Polymer

In this work, two ternary polymer blends were prepared by mixing EP with (UP/PSR) and (PVC/PSR) respectively. Different mixing ratios were used (5, 10, 15 and 20) wt.% of the added polymers. Impact, tensile, compression, flexural and hardness tests were performed on the prepared blends. The results of testing showed that the first ternary blend A (EP/UP/PSR) records tensile strength values higher than that of the second ternary blend B (EP/ PVC/PSR). At 20wt.% of mixing, the blend B records higher impact strength than that of the blend A. There is large difference in the flexural behavior between A and B blends where the blend A records the highest value of flexural strength (F.S) at (5wt.%) while the blend B records the highest value of (F.S) at (20wt.%). From compression test, it is obvious that the values of compressive strength decrease of blend B more than that of the blend A as well as the same behavior can be obtained through the hardness test.

scholarly journals Bicontinuous Microemulsions in Partially Charged Ternary Polymer Blends

2019 ◽  
Vol 8 (9) ◽  
pp. 1166-1171 ◽  
Author(s):  
Jimin Shim ◽  
Frank S. Bates ◽  
Timothy P. Lodge
Keyword(s):  
Polymer Blends ◽  
Ternary Polymer

scholarly journals Dyeing of Polypropylene Blends by Using Microwave Energy

2017 ◽  
Vol 12 (2) ◽  
pp. 155892501701200
Author(s):  
Burcu Sahinbaskan ◽  
Emine Dilara Koçak ◽  
Nigar Merdan ◽  
Mehmet Akalın
Keyword(s):  
Polymer Blends ◽  
Ethylene Vinyl Acetate ◽  
Microwave Energy ◽  
Polymer Fibers ◽  
Morphological Properties ◽  
Color Measurement ◽  
Linear Low Density Polyethylene ◽  
Sem Images ◽  
Ternary Polymer ◽  
Polypropylene Blends

In this work, C.I. Disperse Blue 79 was used to dye 100 % isotactic polypropylene (iPP) fibers, the most widely used fiber in the industry, 100 % linear low density polyethylene (LLDPE) polymer fibers and ternary polymer blends obtained from four different proportions of these polymer fibers with an elastomer of ethylene-vinyl acetate (EVA) in the absence and presence of microwave. The samples were tested for color measurement, color fastness, mechanical and morphological properties. The results of the investigation show that addition of up to 15% EVA in ternary polymer blends results in good color and mechanical properties for both dyeing methods in both the absence and presence of microwave energy. The SEM images indicate there is no porosity on the surfaces of the iPP/LLDPE/EVA ternary polymer blends dyed in the presence of microwave energy. Using microwave energy for dyeing provided a saving of almost 90% of the time normally required and thus a significant amount of energy.

Hydrogen bonding in ternary polymer blend systems: determination of association parameters

1992 ◽  
Vol 25 (26) ◽  
pp. 7101-7106 ◽  
Author(s):  
Christophe Le Menestrel ◽  
Dorab E. Bhagwagar ◽  
Paul C. Painter ◽  
Michael M. Coleman ◽  
John F. Graf
Keyword(s):  
Hydrogen Bonding ◽  
Polymer Blend ◽  
Ternary Polymer
Sign in / Sign up

Export Citation Format

Share Document