Explanation of tackifier effect on the viscoelastic properties of polyolefin-based pressure sensitive adhesives

2005 ◽  
Vol 99 (5) ◽  
pp. 2408-2413 ◽  
Author(s):  
Bing Yuan ◽  
Chris McGlinchey ◽  
Eli M. Pearce
Keyword(s):  
Viscoelastic Properties ◽  
Pressure Sensitive Adhesives ◽  
Pressure Sensitive

scholarly journals Structural and Viscoelastic Properties of Thermoplastic Polyurethanes Containing Mixed Soft Segments with Potential Application as Pressure Sensitive Adhesives

Polymers ◽  
2021 ◽  
Vol 13 (18) ◽  
pp. 3097
Author(s):  
Mónica Fuensanta ◽  
José Miguel Martín-Martínez
Keyword(s):  
Phase Separation ◽  
Potential Application ◽  
Viscoelastic Properties ◽  
Gravimetric Analysis ◽  
Scanning Calorimetry ◽  
Adhesion Properties ◽  
Pressure Sensitive Adhesives ◽  
Thermoplastic Polyurethanes ◽  
Pressure Sensitive ◽  
Soft Segments

Thermoplastic polyurethanes (TPUs) were synthetized with blends of poly(propylene glycol) (PPG) and poly(1,4-butylene adipate) (PAd) polyols, diphenylmethane-4,4′-diisocyanate (MDI) and 1,4-butanediol (BD) chain extender; different NCO/OH ratios were used. The structure and viscoelastic properties of the TPUs were assessed by infrared spectroscopy, differential scanning calorimetry, X-ray diffraction, thermal gravimetric analysis and plate-plate rheology, and their pressure sensitive adhesion properties were assessed by probe tack and 180° peel tests. The incompatibility of the PPG and PAd soft segments and the segregation of the hard and soft segments determined the phase separation and the viscoelastic properties of the TPUs. On the other hand, the increase of the NCO/OH ratio improved the miscibility of the PPG and PAd soft segments and decreased the extent of phase separation. The temperatures of the cool crystallization and melting were lower and their enthalpies were higher in the TPU made with NCO/OH ratio of 1.20. The moduli of the TPUs increased by increasing the NCO/OH ratio, and the tack was higher by decreasing the NCO/OH ratio. In general, a good agreement between the predicted and experimental tack and 180° peel strength values was obtained, and the TPUs synthesized with PPG+PAd soft segments had potential application as pressure sensitive adhesives (PSAs).

scholarly journals Balanced Viscoelastic Properties of Pressure Sensitive Adhesives Made with Thermoplastic Polyurethanes Blends

Polymers ◽  
2019 ◽  
Vol 11 (10) ◽  
pp. 1608 ◽  
Author(s):  
Fuensanta ◽  
Vallino-Moyano ◽  
Martín-Martínez
Keyword(s):  
Phase Separation ◽  
Viscoelastic Properties ◽  
Simple Procedure ◽  
Peel Strength ◽  
Similar Degree ◽  
Gravimetric Analysis ◽  
Scanning Calorimetry ◽  
Pressure Sensitive Adhesives ◽  
Thermoplastic Polyurethanes ◽  
Pressure Sensitive

Pressure sensitive adhesives made with blends of thermoplastic polyurethanes (TPUs PSAs) with satisfactory tack, cohesion, and adhesion have been developed. A simple procedure consisting of the physical blending of methyl ethyl ketone (MEK) solutions of two thermoplastic polyurethanes (TPUs) with very different properties—TPU1 and TPU2—was used, and two different blending procedures have been employed. The TPUs were characterized by infra-red spectroscopy in attenuated total reflectance mode (ATR-IR spectroscopy), differential scanning calorimetry, thermal gravimetric analysis, and plate-plate rheology (temperature and frequency sweeps). The TPUs PSAs were characterized by tack measurement, creep test, and the 180° peel test at 25 °C. The procedure for preparing the blends of the TPUs determined differently their viscoelastic properties, and the properties of the TPUs PSAs as well, the blending of separate MEK solutions of the two TPUs imparted higher tack and 180° peel strength than the blending of the two TPUs in MEK. TPU1 + TPU2 blends showed somewhat similar contributions of the free and hydrogen-bonded urethane groups and they had an almost similar degree of phase separation, irrespective of the composition of the blend. Two main thermal decompositions at 308–317 °C due to the urethane hard domains and another at 363–373 °C due to the soft domains could be distinguished in the TPU1 + TPU2 blends, the weight loss of the hard domains increased and the one of the soft domains decreased by increasing the amount of TPU2 in the blends. The storage moduli of the TPU1 + TPU2 blends were similar for temperatures lower than 20 °C and the moduli at the cross over of the moduli were lower than in the parent TPUs. The improved properties of the TPU1 + TPU2 blends derived from the creation of a higher number of hydrogen bonds upon removal of the MEK solvent, which lead to a lower degree of phase separation between the soft and the hard domains than in the parent TPUs. As a consequence, the properties of the TPU1 + TPU2 PSAs were improved because good tack, high 180° peel strength, and sufficient cohesion were obtained, particularly in 70 wt% TPU1 + 30 wt% TPU2 PSA.

Adhesion strength and viscoelastic properties of polydimethylsiloxane (PDMS) based elastomeric nanocomposites with embedded electrospun nanofibers

Soft Matter ◽  
2019 ◽  
Vol 15 (28) ◽  
pp. 5739-5747 ◽  
Author(s):  
Tushar D. Deshpande ◽  
Yogesh R. G. Singh ◽  
Sandip Patil ◽  
Yogesh M. Joshi ◽  
Ashutosh Sharma
Keyword(s):  
Polyvinyl Alcohol ◽  
Adhesion Strength ◽  
Viscoelastic Properties ◽  
Electrospun Nanofibers ◽  
Pressure Sensitive Adhesives ◽  
Pressure Sensitive

In the present study, the adhesive and viscoelastic properties of polydimethylsiloxane (PDMS) based nanocomposite pressure sensitive adhesives (PSAs) with embedded electrospun polyacrylonitrile (PAN) and polyvinyl alcohol (PVA) nanofibers as fillers were investigated.

Passivation of pressure sensitive adhesive stickies by addition of acrylic fibers to OCC pulp before papermaking

TAPPI Journal ◽  
2016 ◽  
Vol 15 (10) ◽  
pp. 631-639
Author(s):  
MOHAMMAD HADI ARYAIE MONFARED ◽  
HOSSEIN RESALATI ◽  
ALI GHASEMIAN ◽  
MARTIN A. HUBBE
Keyword(s):  
Adverse Effects ◽  
Control Sample ◽  
Pressure Sensitive Adhesive ◽  
Acrylic Fiber ◽  
Burst Strength ◽  
Pressure Sensitive Adhesives ◽  
Pressure Sensitive ◽  
Tear Index ◽  
Breaking Length ◽  
Acrylic Fibers

This study investigated the addition of acrylic fiber to old corrugated container (OCC) pulp as a possible means of overcoming adverse effects of water-based pressure sensitive adhesives during manufacture of paper or paperboard. Such adhesives can constitute a main source of stickies, which hurt the efficiency of the papermaking process and make tacky spots in the product. The highest amount of acrylic fiber added to recycled pulps generally resulted in a 77% reduction in accepted pulp microstickies. The addition of acrylic fibers also increased pulp freeness, tear index, burst strength, and breaking length, though there was a reduction in screen yield. Hence, in addition to controlling the adverse effects of stickies, the addition of acrylic fibers resulted in the improvement of the mechanical properties of paper compared with a control sample.

Sign in / Sign up

Export Citation Format

Share Document