Development of novel functional conducting elastomer blends containing butyl rubber and low-density polyethylene for current switching, temperature sensor, and EMI shielding effectiveness applications

2005 ◽  
Vol 97 (3) ◽  
pp. 1125-1138 ◽  
Author(s):  
Farid El-Tantawy
Keyword(s):  
Temperature Sensor ◽  
Butyl Rubber ◽  
Low Density Polyethylene ◽  
Low Density ◽  
Shielding Effectiveness ◽  
Emi Shielding ◽  
Current Switching ◽  
Emi Shielding Effectiveness ◽  
Switching Temperature

Electromagnetic interference of nickel ferrite and copper ferrite filled low-density polyethylene composite

2020 ◽  
Vol 54 (30) ◽  
pp. 4799-4806 ◽  
Author(s):  
Kriti Vaid ◽  
Deepshikha Rathore ◽  
Umesh Kumar Dwivedi
Keyword(s):  
Electromagnetic Interference ◽  
Nickel Ferrite ◽  
Low Density Polyethylene ◽  
Copper Ferrite ◽  
Low Density ◽  
Shielding Effectiveness ◽  
Emi Shielding ◽  
Melt Mixing ◽  
Ph Values ◽  
Emi Shielding Effectiveness

This study reports the preparation of nickel ferrite (NiFe2O4) and copper ferrite (CuFe2O4) filled low-density polyethylene (LDPE) composite through a melt mixing process for employing in electromagnetic shielding applications. The X-Ray diffraction (XRD) with different pH values 6, 8 and 10 resulted the formation of cubic structure for NiFe2O4 of cristallite size 21 nm, 25 nm and 40 nm, respectively and tetragonal structure for CuFe2O4 with crystallite size 27 nm, 24 nm and 91 nm, respectively. Electromagnetic interference (EMI) shielding measurements of the prepared samples LDPE/NiFe2O4 and LDPE/CuFe2O4 having different pH values 6, 8 and, 10 for 10% and 30% filler concentrations were analyzed over X-band with a frequency range from 8 GHz to 12.4 GHz. The pure LDPE exhibits the total shielding effectiveness (SE) of 11.6 dB whereas with the addition of NiFe2O4 and CuFe2O4, the composites exhibit increment in EMI shielding effectiveness up to the maximum value of 15.3 dB for LDPE/NiFe2O4 and 12.6 dB for LDPE/CuFe2O4 respectively.

scholarly journals Ultrathin, Lightweight, and Flexible CNT Buckypaper Enhanced Using MXenes for Electromagnetic Interference Shielding

2021 ◽  
Vol 13 (1) ◽  
Author(s):  
Rongliang Yang ◽  
Xuchun Gui ◽  
Li Yao ◽  
Qingmei Hu ◽  
Leilei Yang ◽  
...  
Keyword(s):  
Electromagnetic Interference ◽  
High Performance ◽  
Electronic Devices ◽  
Deposition Process ◽  
Shielding Effectiveness ◽  
Emi Shielding ◽  
Emi Shielding Effectiveness ◽  
X Band ◽  
Wearable Electronic Devices ◽  
Emi Se

AbstractLightweight, flexibility, and low thickness are urgent requirements for next-generation high-performance electromagnetic interference (EMI) shielding materials for catering to the demand for smart and wearable electronic devices. Although several efforts have focused on constructing porous and flexible conductive films or aerogels, few studies have achieved a balance in terms of density, thickness, flexibility, and EMI shielding effectiveness (SE). Herein, an ultrathin, lightweight, and flexible carbon nanotube (CNT) buckypaper enhanced using MXenes (Ti3C2Tx) for high-performance EMI shielding is synthesized through a facile electrophoretic deposition process. The obtained Ti3C2Tx@CNT hybrid buckypaper exhibits an outstanding EMI SE of 60.5 dB in the X-band at 100 μm. The hybrid buckypaper with an MXene content of 49.4 wt% exhibits an EMI SE of 50.4 dB in the X-band with a thickness of only 15 μm, which is 105% higher than that of pristine CNT buckypaper. Furthermore, an average specific SE value of 5.7 × 104 dB cm2 g−1 is exhibited in the 5-μm hybrid buckypaper. Thus, this assembly process proves promising for the construction of ultrathin, flexible, and high-performance EMI shielding films for application in electronic devices and wireless communications.

Elaboration and Characterization of Cu Based Nanocomposites for Electromagnetic Interferences Shielding

2021 ◽  
Vol 412 ◽  
pp. 177-184
Author(s):  
Farid Kara ◽  
Fadhéla Otmane ◽  
Samir Bellal ◽  
Amira Djenet Guerfi ◽  
S. Triaa
Keyword(s):  
Epoxy Resin ◽  
Xrd Analysis ◽  
High Energy ◽  
Shielding Effectiveness ◽  
Emi Shielding ◽  
Emi Shielding Effectiveness ◽  
Cell Measurement ◽  
Wave Guides ◽  
Pure Cu ◽  
Thin Samples

An electromagnetic interferences (EMI) shielding is a material that attenuates radiated electromagnetic energy. Polymer nanocomposites is a class of materials that combine electrical, thermal, dielectric, magnetic and/ or mechanical properties, which are useful for the suppression of electromagnetic interferences. In this work, we looked over the effectiveness of the electromagnetic interferences shielding of polymer-based nanocomposites. These are thin samples of epoxy resin strengthened with nanostructured Cu powders. Nanostructured Cu powders were obtained by mechanical milling using the high-energy RETSCH PM400 ball mill (200 rpm). A powder sampling was conducted after 3h, 6h, 12h, 24h, 33h, 46h and 58h milling for characterization requirements. XRD analysis via the Williamson-Hall method shows that the mean crystallites size decreases from 151.6 nm (pure Cu phase) to 13.8 nm (58 h milling). Simultaneously, the lattice strain increases from 0.1% (pure Cu phase) to 0.59% (58 h milling). The elaboration of thin samples was performed by mixing a vol./3 fractions of nanostructured Cu powder, epoxy resin and hardener. Thin slabs of 1 mm thickness were moulded for use in a rectangular wave-guide. The EMI shielding experimental involved a two ports S parameters cell measurement made of R120 metallic wave-guides of rectangular section (19.05x9.525 mm2) and operational over the frequency band of 9.84 to 15 GHz associated to a network analyser. Obtained results show moderate EMI shielding effectiveness for the milled Cu-based slabs.

scholarly journals EMI SHIELDING EFFECTIVENESS OF COMPOSITES BASED ON BARIUM FERRITE, PANI, AND MWCNT

2016 ◽  
Vol 52 ◽  
pp. 79-87 ◽  
Author(s):  
Muhammad Hanif Zahari ◽  
Beh Hoe Guan ◽  
Ee Meng Cheng ◽  
Muhammad Farham Che Mansor ◽  
Kean Chuan Lee
Keyword(s):  
Barium Ferrite ◽  
Shielding Effectiveness ◽  
Emi Shielding ◽  
Emi Shielding Effectiveness

scholarly journals Electromagnetic Interference Shielding Performance Enhancement of Stretchable Transparent Conducting Silver Nanowire Networks with Graphene Encapsulation

2021 ◽  
Author(s):  
Siyi Yan ◽  
Peng Li ◽  
Zhongshi Ju ◽  
He Chen ◽  
Jiangang Ma
Keyword(s):  
Electromagnetic Interference ◽  
Performance Enhancement ◽  
Mechanical Stability ◽  
Silver Nanowire ◽  
Shielding Effectiveness ◽  
Emi Shielding ◽  
Dielectric Polarization ◽  
Emi Shielding Effectiveness ◽  
Graphene Films ◽  
Transparent Conducting

Abstract Silver nanowire (AgNW) networks are promising transparent conducting materials for electromagnetic interference (EMI) shielding and diverse optoelectronic devices. However, the poor contact between adjacent AgNWs leads to low electrical conductivity and weak mechanical stability of AgNW networks, which are limiting the practical application of these electronics. Here we report an efficient strategy to improve the overall performance of AgNW networks, in which the AgNW networks are sandwiched between two layers of graphene films. The graphene films improve the contact of overlapped AgNWs and bridge the discrete AgNWs, and thus increase the conductivity of graphene/AgNWs/graphene (GAG) films. Microwave permittivity measurements together with mechanism analyses reveal that the graphene films can enhance the EMI shielding effectiveness of AgNW networks through offering extra conduction loss, multiple dielectric polarization centers and multi-reflection processes. As a result, the GAG film with an average transmittance of 88% exhibits a sheet resistance lower than 15 Ω sq− 1 and an EMI shielding effectiveness of 31 dB (in the frequency range of 8.2‒12.4 GHz) after repeated stretching and release at a strain of 40%. Such a total performance is superior to that of most of as-reported transparent conductors. The GAG films therefore show application potential in the age of Internet of Things that electromagnetic radiation pollutions are everywhere.

Flexible, conductive, porous, fibrillar polymer–gold nanocomposites with enhanced electromagnetic interference shielding and mechanical properties

2017 ◽  
Vol 5 (5) ◽  
pp. 1095-1105 ◽  
Author(s):  
Jun Li ◽  
Hu Liu ◽  
Jiang Guo ◽  
Zhen Hu ◽  
Zhijiang Wang ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Gold Nanoparticles ◽  
Self Assembly ◽  
Electromagnetic Interference ◽  
Shielding Effectiveness ◽  
Emi Shielding ◽  
Electromagnetic Interference Shielding ◽  
Emi Shielding Effectiveness ◽  
Conductive Nanocomposites ◽  
Gold Nanocomposites

Flexible lightweight conductive nanocomposites prepared by self-assembly of gold nanoparticles on charged polymer nanofibers show enhanced EMI shielding effectiveness and mechanical properties.

Sign in / Sign up

Export Citation Format

Share Document