Phase behavior on the binary and ternary mixtures of poly(cyclohexyl acrylate) and poly(cyclohexyl methacrylate) in supercritical CO2

2004 ◽  
Vol 94 (3) ◽  
pp. 1117-1125 ◽  
Author(s):  
Hun-Soo Byun
Keyword(s):  
Phase Behavior ◽  
Supercritical Co2 ◽  
Ternary Mixtures ◽  
Binary And Ternary Mixtures ◽  
Cyclohexyl Methacrylate

scholarly journals Phase Behavior of Selected Condensed Double-Decker Shaped Silsesquioxane Compounds

2021 ◽  
Author(s):  
David F. Vogelsang ◽  
Robert E. Maleczka ◽  
Andre Lee
Keyword(s):  
Thermal Properties ◽  
Phase Behavior ◽  
Melting Temperature ◽  
Ternary Eutectic ◽  
Thermal Characteristics ◽  
Ternary Mixtures ◽  
Double Decker ◽  
Binary And Ternary Mixtures

Abstract Bisfunctional dichlorosilanes were reacted with tetrasilanol of double-decker shaped octaphenylsilsesquioxane (DDSQ) to form fully condensed DDSQ compounds. The crystallographic and thermal characteristics of these compounds were examined. For compounds capped with dichlorosilanes bearing linear aliphatic moieties, as the number of carbon increases from methyl to n-butyl (from 1 to 4) the melting temperature, Tm, dropped from 546 K to 416 K. While for compounds capped with cycloaliphatic, as the moiety changes from cyclopentyl to cyclohexyl, the value of Tm increases from 533 K to 555 K. Surprising, the highest Tm observed was that when capping was done using diisopropyl dichlorosilane. A Tm of around 565 K was observed, which was even higher as compare to diphenyl dichlorosilane capped DDSQ, which had Tm of about 526 K. Phase behavior of binary and ternary mixtures of these condensed DDSQ was also investigated. To our surprise, mixtures of these compounds form eutectic. The eutectic points were calculated based on ideal binary and ternary eutectic from the thermal properties of pure components. Depending on the crystallography, experimental observations of eutectic match well with calculated values.

Energy saving technology for sintering of black bricks from high-siliceous clay

MRS Advances ◽  
2020 ◽  
Vol 5 (61) ◽  
pp. 3123-3131
Author(s):  
Mario Flores Nicolas ◽  
Marina Vlasova ◽  
Pedro Antonio Márquez Aguilar ◽  
Mykola Kakazey ◽  
Marcos Mauricio Chávez Cano ◽  
...  
Keyword(s):  
Low Temperature ◽  
Oxygen Deficiency ◽  
Glass Ceramics ◽  
Total Content ◽  
Ceramic Materials ◽  
Ternary Mixtures ◽  
High Porosity ◽  
Reducing Conditions ◽  
Binary And Ternary Mixtures ◽  
Dark Color

AbstractThe low-temperature synthesis of bricks prepared from high-siliceous clays by the method of plastic molding of blanks was used. For the preparation of brick blanks, binary and ternary mixtures of high-siliceous clays, black sand, and bottle glass cullet were used. Gray-black low-porosity and high-porosity ceramics was obtained by sintering under conditions of oxygen deficiency. It has been established that to initiate plastic in mixtures containing high-siliceous clay, it is necessary to add montmorillonite/bentonite additives, carry out low-temperature sintering, and introduce low-melting glass additives with a melting point ranging from 750 to 800 °C. The performed investigations have shown that the sintering of mixtures with a total content of iron oxide of about 5 wt% under reducing conditions at Tsint. = 800°C for 8 h leads to the formation of glass ceramics consisting of quartz, feldspars, and a phase. The main sources of the appearance of a dark color is the formation of [Fe3+O4]4- and [Fe3+O6]9- anions in the composition of the glass phase and feldspars. By changing the contents of clay, sand, and glass in sintering, it is possible to obtain two types of ceramic materials: (a) in the form of building bricks and (b) in the form of porous fillers.

Properties of Refrigerants from Cubic Equations of State

2008 ◽  
Vol 59 (5) ◽  
Author(s):  
Viorel Feroiu ◽  
Dan Geana ◽  
Catinca Secuianu
Keyword(s):  
Experimental Data ◽  
Vapor Pressure ◽  
Equations Of State ◽  
Ternary Mixtures ◽  
Volumetric Properties ◽  
Mixing Rules ◽  
Saturation Curve ◽  
Equilibrium Thermodynamic ◽  
Liquid Equilibrium ◽  
Binary And Ternary Mixtures

Vapour � liquid equilibrium, thermodynamic and volumetric properties were predicted for three pure hydrofluorocarbons: difluoromethane (R32), pentafluoroethane (R125) and 1,1,1,2 � tetrafluoroethane (R134a) as well as for binary and ternary mixtures of these refrigerants. Three cubic equations of state GEOS3C, SRK (Soave � Redlich � Kwong) and PR (Peng � Robinson) were used. A wide comparison with literature experimental data was made. For the refrigerant mixtures, classical van der Waals mixing rules without interaction parameters were used. The GEOS3C equation, with three parameters estimated by matching several points on the saturation curve (vapor pressure and corresponding liquid volumes), compares favorably to other equations in literature, being simple enough for applications.

Catalytic hydrogenation of binary and ternary mixtures of unsaturated substances in the liquid phase on platinum

1979 ◽  
Vol 44 (8) ◽  
pp. 2378-2383 ◽  
Author(s):  
Libor Červený ◽  
Radka Junová ◽  
Vlastimil Růžička
Keyword(s):  
Liquid Phase ◽  
Binary Mixtures ◽  
Silica Gel ◽  
Catalytic Hydrogenation ◽  
Ternary Systems ◽  
Ternary Mixtures ◽  
Unsaturated Alcohol ◽  
Solvent Concentration ◽  
Binary And Ternary Mixtures ◽  
Hydrogenation Selectivity

Hydrogenation of olefinic substrates in binary and ternary mixtures using 5% Pt on silica gel as the catalyst was studied in normal conditions in the liquid phase with methanol or cyclohexane or in solvent-free systems. The effect of the solvent concentration on the selectivity of hydrogenation of the unsaturated alcohol-olefin binary mixtures was investigated. In ternary systems of unsaturated substrates, the effect of each of the substrates on the selectivity of hydrogenation of the remaining two substances was examined. Another system was found in which a jump change of the hydrogenation selectivity occurred on the vanishing of the fastest reacting substance.

Sign in / Sign up

Export Citation Format

Share Document