Studies on high-speed melt spinning of noncircular cross-section fibers. II. On-line measurement of the spin line, including change in cross-sectional shape

2001 ◽  
Vol 80 (9) ◽  
pp. 1582-1588 ◽  
Author(s):  
Wataru Takarada ◽  
Hiroshi Ito ◽  
Takeshi Kikutani ◽  
Norimasa Okui
Keyword(s):  
Cross Section ◽  
High Speed ◽  
Melt Spinning ◽  
Cross Sectional ◽  
Noncircular Cross Section ◽  
Line Measurement ◽  
On Line ◽  
Sectional Shape

On-Line Measurement of Fiber Temperature in the Melt-Spinning Processes

2013 ◽  
Vol 821-822 ◽  
pp. 149-152
Author(s):  
Xin Wen ◽  
Sheng Lin Yang ◽  
Guang Li
Keyword(s):  
High Speed ◽  
Melt Spinning ◽  
Probe Field ◽  
Infrared Thermometer ◽  
Line Measurement ◽  
Measurement Results ◽  
On Line ◽  
Important Means ◽  
Method Of Measurement ◽  
Reliable Temperature

The online temperature detections of fiber along the spinning line should be the important means for the precise controlling of fiber higher order structures as well as fiber-final performance. In this paper, a method of measurement fiber temperature has been introduced which mainly use the instrument of monochromatic infrared thermometer to measure fiber temperature in the melt-spinning processes. Due to the probe field of view of monochromatic infrared thermometer being much larger than the fiber diameter, monochrome infrared thermometers can't be used to measure temperature of fibers directly, the measurement results is an average between the fiber and backgrounds, which can't be used to indicate the temperature of fibers directly and have to calibrated. The calibrated results of monochromatic infrared thermometer are compared to the measurement results of infrared thermography. It has been found that the on-line measurement with infrared thermometer could promise high-speed and highly reliable temperature testing for the fibers.

On-line measurement of orientation development in the high-speed melt spinning process

1999 ◽  
Vol 39 (12) ◽  
pp. 2349-2357 ◽  
Author(s):  
Takeshi Kikutani ◽  
Kazuhito Nakao ◽  
Wataru Takarada ◽  
Hiroshi Ito
Keyword(s):  
High Speed ◽  
Melt Spinning ◽  
Line Measurement ◽  
Spinning Process ◽  
On Line

Studies on high-speed melt spinning of noncircular cross- section fibers. I. Structural analysis of as-spun fibers

2001 ◽  
Vol 80 (9) ◽  
pp. 1575-1581 ◽  
Author(s):  
Wataru Takarada ◽  
Hiroshi Ito ◽  
Takeshi Kikutani ◽  
Norimasa Okui
Keyword(s):  
Structural Analysis ◽  
Cross Section ◽  
High Speed ◽  
Melt Spinning ◽  
Noncircular Cross Section ◽  
Spun Fibers

Automated 3D measurement of fiber cross section morphology in handsheets

2012 ◽  
Vol 27 (2) ◽  
pp. 264-269 ◽  
Author(s):  
Christian Lorbach ◽  
Ulrich Hirn ◽  
Johannes Kritzinger ◽  
Wolfgang Bauer
Keyword(s):  
Image Analysis ◽  
Cross Section ◽  
Cross Sections ◽  
Image Plane ◽  
3D Measurement ◽  
Cross Sectional ◽  
Fiber Cross Section ◽  
Fiber Wall ◽  
Sectional Shape ◽  
Cross Section Geometry

Abstract We present a method for 3D measurement of fiber cross sectional morphology from handsheets. An automated procedure is used to acquire 3D datasets of fiber cross sectional images using an automated microtome and light microscopy. The fiber cross section geometry is extracted using digital image analysis. Simple sample preparation and highly automated image acquisition and image analysis are providing an efficient tool to analyze large samples. It is demonstrated that if fibers are tilted towards the image plane the images of fiber cross sections are always larger than the true fiber cross section geometry. In our analysis the tilting angles of the fibers to the image plane are measured. The resulting fiber cross sectional images are distorted to compensate the error due to fiber tilt, restoring the true fiber cross sectional shape. We use an approximated correction, the paper provides error estimates of the approximation. Measurement results for fiber wall thickness, fiber coarseness and fiber collapse are presented for one hardwood and one softwood pulp.

Experimental investigation and optimization on field shaper structure parameters in magnetic pulse welding

2021 ◽  
pp. 095440542110148
Author(s):  
Yingzi Chen ◽  
Zhiyuan Yang ◽  
Wenxiong Peng ◽  
Huaiqing Zhang
Keyword(s):  
Magnetic Field ◽  
High Speed ◽  
Light Metal ◽  
Magnetic Pulse ◽  
Cross Sectional ◽  
Magnetic Pulse Welding ◽  
Pulse Welding ◽  
Sectional Shape ◽  
Welding System ◽  
The Magnetic Field

Magnetic pulse welding is a high-speed welding technology, which is suitable for welding light metal materials. In the magnetic pulse welding system, the field shaper can increase the service life of the coil and contribute to concentrating the magnetic field in the welding area. Therefore, optimizing the structure of the field shaper can effectively improve the efficiency of the system. This paper analyzed the influence of cross-sectional shape and inner angle of the field shaper on the ability of concentrating magnetic field via COMSOL software. The structural strength of various field shapers was also analyzed in ABAQUS. Simulation results show that the inner edge of the field shaper directly affects the deformation and welding effect of the tube. So, a new shape of field shaper was proposed and the experimental results prove that the new field shaper has better performance than the conventional field shaper.

scholarly journals An atomic resolution study of precipitates in an Al-Ge Alloy

1986 ◽  
Vol 44 ◽  
pp. 538-539
Author(s):  
U. Dahmen ◽  
C. Nelson ◽  
K.H. Westmacott
Keyword(s):  
Cross Section ◽  
Atomic Resolution ◽  
Face Centered Cubic ◽  
Orientation Relationships ◽  
Cross Sectional ◽  
The Past ◽  
Moiré Fringes ◽  
Typical Aspect ◽  
Face Centered ◽  
Sectional Shape

The difficulty of precipitating germanium in dilute aluminum-germanium alloys is due to a large difference in crystal structures (face-centered cubic and diamond cubic) accompanied by a substantial volume expansion of 36%. A great variety of precipitate morphologies and orientation relationships are observed. A frequently found morphology is that of <100> needles. By selected area diffraction and Moire fringes it has been established that <100> Al and <110> Ge are parallel along the needle axis. The typical aspect ratio of about 100 has made it difficult in the past to investigate the cross-sectional shape and internal structure of these needles, although some indications of internal twinning were found in plates. in the present work, the Berkeley Atomic Resolution Microscope was used to examine needles in cross section by imaging along the <110> Ge <100> Al needle axis.

scholarly journals Optimization of the cross-sectional shape of the belts of trihedral lattice supports

2019 ◽  
Vol 7 (4) ◽  
pp. 5-8
Author(s):  
Linar Sabitov ◽  
Ilnar Baderddinov ◽  
Anton Chepurnenko
Keyword(s):  
Objective Function ◽  
Nonlinear Optimization ◽  
Cross Section ◽  
Optimization Methods ◽  
Cross Sectional ◽  
Maximum Value ◽  
Axial Moment ◽  
The Cross ◽  
Nonlinear Optimization Methods ◽  
Sectional Shape

The article considers the problem of optimizing the geometric parameters of the cross section of the belts of a trihedral lattice support in the shape of a pentagon. The axial moment of inertia is taken as the objective function. Relations are found between the dimensions of the pentagonal cross section at which the objective function takes the maximum value. We introduce restrictions on the constancy of the consumption of material, as well as the condition of equal stability. The solution is performed using nonlinear optimization methods in the Matlab environment.

Sign in / Sign up

Export Citation Format

Share Document