Study on multiple‐contact phase behavior in natural gas injection for enhanced oil recovery in Tarim Basin, China

2019 ◽  
Vol 14 (2) ◽  
pp. e2286
Author(s):  
Ke Zhang ◽  
Hui Pu ◽  
Shi Li ◽  
Xinglong Chen
Keyword(s):  
Natural Gas ◽  
Phase Behavior ◽  
Enhanced Oil Recovery ◽  
Oil Recovery ◽  
Tarim Basin ◽  
Gas Injection ◽  
Contact Phase

scholarly journals Experimental Studies of Immiscible High-Nitrogen Natural Gas WAG Injection Efficiency in Mixed-Wet Carbonate Reservoir

Energies ◽  
2020 ◽  
Vol 13 (9) ◽  
pp. 2346
Author(s):  
Mirosław Wojnicki ◽  
Jan Lubaś ◽  
Marcin Warnecki ◽  
Jerzy Kuśnierczyk ◽  
Sławomir Szuflita
Keyword(s):  
Natural Gas ◽  
Enhanced Oil Recovery ◽  
Oil Recovery ◽  
Gas Injection ◽  
Water Injection ◽  
Experimental Studies ◽  
Carbonate Reservoir ◽  
High Nitrogen ◽  
The Impact ◽  
Wag Injection

Crucial oil reservoirs are located in naturally fractured carbonate formations and are currently reaching a mature phase of production. Hence, a cost-effective enhanced oil recovery (EOR) method is needed to achieve a satisfactory recovery factor. The paper focuses on an experimental investigation of the efficiency of water alternating sour and high-nitrogen (~85% N2) natural gas injection (WAG) in mixed-wetted carbonates that are crucial reservoir rocks for Polish oil fields. The foam-assisted water alternating gas method (FAWAG) was also tested. Both were compared with continuous water injection (CWI) and continuous gas injection (CGI). A series of coreflooding experiments were conducted within reservoir conditions (T = 126 ℃, P = 270 bar) on composite cores, and each consisted of four reservoir dolomite core plugs and was saturated with the original reservoir fluids. In turn, some of the experiments were conducted on artificially fractured cores to evaluate the impact of fractures on recovery efficiency. The performance evaluation of the tested methods was carried out by comparing oil recoveries from non-fractured composite cores, as well as fractured. In the case of non-fractured cores, the WAG injection outperformed continuous gas injection (CGI) and continuous water injection (CWI). As expected, the presence of fractures significantly reduced performance of WAG, CGI and CWI injection modes. In contrast, with regard to FAWAG, deployment of foam flow in the presence of fractures remarkably enhanced oil recovery, which confirms the possibility of using the FAWAG method in situations of premature gas breakthrough. The positive results encourage us to continue the research of the potential uses of this high-nitrogen natural gas in EOR, especially in the view of the utilization of gas reservoirs with advantageous location, high reserves and reservoir energy.

Experimental Study of Miscible Thickened Natural Gas Injection for Enhanced Oil Recovery

2017 ◽  
Vol 31 (5) ◽  
pp. 4951-4965 ◽  
Author(s):  
Nasser M. Al Hinai ◽  
A. Saeedi ◽  
Colin D. Wood ◽  
R. Valdez ◽  
Lionel Esteban
Keyword(s):  
Experimental Study ◽  
Natural Gas ◽  
Enhanced Oil Recovery ◽  
Oil Recovery ◽  
Gas Injection

Applicability of Enhanced Oil Recovery techniques on mature fields - Interest of gas injection

2005 ◽  
Author(s):  
Frederic Maubeuge ◽  
Danielle Christine Morel ◽  
Jean-Pierre Charles Fossey ◽  
Said Hunedi ◽  
Jacques Albert Danquigny
Keyword(s):  
Enhanced Oil Recovery ◽  
Oil Recovery ◽  
Gas Injection ◽  
Recovery Techniques

scholarly journals Thermal Stability and Compatibility of Surfactants in Presence of Formation Water Salinity under Reservoir Conditions

2020 ◽  
Vol 39 (4) ◽  
pp. 826-830
Author(s):  
Muhammad Khan Memon ◽  
Ubedullah Ansari ◽  
Habib U Zaman Memon
Keyword(s):  
Thermal Stability ◽  
Enhanced Oil Recovery ◽  
Oil Recovery ◽  
Gas Injection ◽  
Surfactant Solution ◽  
Water Salinity ◽  
Formation Water ◽  
Reservoir Temperature ◽  
Gas Mobility ◽  
Formation Water Salinity

In the surfactant alternating gas injection, the injected surfactant slug is remained several days under reservoir temperature and salinity conditions. As reservoir temperature is always greater than surface temperature. Therefore, thermal stability of selected surfactants use in the oil industry is almost important for achieving their long-term efficiency. The study deals with the screening of individual and blended surfactants for the applications of enhanced oil recovery that control the gas mobility during the surfactant alternating gas injection. The objective is to check the surfactant compatibility in the presence of formation water under reservoir temperature of 90oC and 120oC. The effects of temperature and salinity on used surfactant solutions were investigated. Anionic surfactant Alpha Olefin Sulfonate (AOSC14-16) and Internal Olefin Sulfonate (IOSC15-18) were selected as primary surfactants. Thermal stability test of AOSC14-16 with different formation water salinity was tested at 90oC and 120oC. Experimental result shows that, no precipitation was observed by surfactant AOSC14-16 when tested with different salinity at 90oC and 120oC. Addition of amphoteric surfactant Lauramidopropylamide Oxide (LMDO) with AOSC14-16 improves the stability in the high percentage of salinity at same temperature, whereas, the surfactant blend of IOSC15-18 and Alcohol Aloxy Sulphate (AAS) was resulted unstable. The solubility and chemical stability at high temperature and high salinity condition is improved by the blend of AOSC14-16+LMDO surfactant solution. This blend of surfactant solution will help for generating stable foam for gas mobility control in the methods of chemical Enhanced Oil Recovery (EOR).

Risk Assessment and Enhanced Oil Recovery Effect of Gravity Assisted Oxygen-Reduced Air Flooding

2021 ◽  
Author(s):  
Lijuan Huang ◽  
Zongfa Li ◽  
Shaoran Ren ◽  
Yanming Liu
Keyword(s):  
Natural Gas ◽  
Oil Recovery ◽  
Gas Injection ◽  
Oil Production ◽  
Air Injection ◽  
Oil Reservoirs ◽  
Displacement Efficiency ◽  
Risk Area ◽  
Recovery Method ◽  
High Risk Area

Abstract The technology of air injection has been widely used in the second and tertiary recovery in oilfields. However, due to the injected air and natural gas will explode, the safety of the gas injection technology has attracted much attention. Gravity assisted oxygen-reduced air flooding is a new method that eliminates explosion risks and improves oil recovery in large-dip oil reservoirs or thick oil layers. The explosion limit data of different components of natural gas under high pressure were obtained through explosion experiments, which verified the suppression effect of oxygen-reduced air on explosions. The influence of natural gas composition and concentration on explosion limits was also investigated. In addition, a rotatable displacement device was used to study the feasibility of gravity assisted oxygen-reduced air injection for improving the heavy oil reservoirs recovery. Under pressure and temperature conditions of 20MPa and 371K, the sand-filled gravity flooding experiments with different dip angles were carried out using oxygen-reduced air with an oxygen content of 8%. The results show that with the increase of the reservoir dip, the pore volume of the injected fluid at the gas channeling point, the efficient development time of gas injection, and the final displacement efficiency of gas injection development all increase through gravity stabilization caused by gravity differentiation. In the presence of a dip angle, the cumulative oil production before the gas breakthrough point exceeded 80% of the oil production during the entire production process, indicating that gravity assisted oxygen-reduced air flooding is an effective and safe improving oil recovery method. Finally, the explosion risk of each link of the air injection process is analyzed, and the high-risk area and the low-risk area are determined.

Sign in / Sign up

Export Citation Format

Share Document