Heat transfer in a round tube with sinusoidal wall heat flux distribution

AIChE Journal ◽  
1965 ◽  
Vol 11 (4) ◽  
pp. 690-695 ◽  
Author(s):  
Chia-Jung Hsu
Keyword(s):  
Heat Transfer ◽  
Heat Flux ◽  
Flux Distribution ◽  
Wall Heat Flux ◽  
Heat Flux Distribution ◽  
Round Tube ◽  
Sinusoidal Wall

scholarly journals Thermal analysis in thin-film fluid regions of rectangular microgroove

2018 ◽  
Vol 22 (2) ◽  
pp. 899-897
Author(s):  
Xiaohong Gui ◽  
Xiange Song ◽  
Baisheng Nie
Keyword(s):  
Thin Film ◽  
Heat Transfer ◽  
Heat Flux ◽  
Contact Angle ◽  
Film Thickness ◽  
Flux Distribution ◽  
Total Heat ◽  
Heat Flux Distribution ◽  
Total Heat Transfer ◽  
Thin Film Thickness

The effects of contact angle and superheat on thin-film thickness and heat flux distribution occurring in a rectangle microgroove are numerically simulated. Accordingly, physical, and mathematical models are built in detail. Numerical results indicate that meniscus radius and thin-film thickness increase with the improvement of contact angle. The heat flux distribution in the thin-film region increases non-linearly as the contact angle decreases. The total heat transfer through the thin-film region increases with the improvement of superheat, and decreases as the contact angle increases. When the contact angle is equal to zero, the heat transfer in the thin-film region accounts for more than 80% of the total heat transfer. Intensive evaporation in the thin-film region plays a key role in heat transfer for the rectangle capillary microgroove. The liquid with higher wetting performance is more capable of playing the advantages of higher intensity heat transfer in thin- film region. The current investigation will result in a better understanding of thin- -film evaporation and its effect on the effective thermal conductivity in the rectangle microgroove.

scholarly journals Transient Heat Transfer in Rotating Cylinder - Thermography Measurement to Analyse Intense Heat Flux Distribution

2008 ◽  
Author(s):  
J.C. Batsale ◽  
J.P. Lasserre ◽  
M. Varenne-Pellegrini ◽  
V. Desormiere ◽  
L. Authesserre ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Heat Flux ◽  
Flux Distribution ◽  
Rotating Cylinder ◽  
Transient Heat Transfer ◽  
Heat Flux Distribution ◽  
Intense Heat

Co-Axial Laminar Multiphase Jet: A Novel Methodology for the Attainment Enhancement in Transition Boiling Regime

2020 ◽  
Vol 13 (1) ◽  
Author(s):  
Kashinath Barik ◽  
B. Swain ◽  
A.R. Pati ◽  
Susmit Chitransh ◽  
S.S. Mohapatra
Keyword(s):  
Heat Transfer ◽  
Heat Flux ◽  
Flux Distribution ◽  
Flow Behavior ◽  
Heat Transfer Analysis ◽  
Heat Flux Distribution ◽  
Low Mass ◽  
Multiphase Fluid ◽  
Thermal Diffusivities ◽  
The Comparative Study

Abstract In the current investigation, by using a very low mass flux co-axial laminar multiphase fluid jet, enhancement in heat transfer rate, uniformity in heat flux distribution, and reduction in coolant consumption rate characteristics are simultaneously tried to achieve in case of cooling from a very high initial temperature (900 °C). The information on quenching technology depicting all the above-mentioned advantages has not been reported in the literature. In the present work, kerosene–water, nanofluid (Al2O3 = 0.15%)–kerosene, and nanofluid (Al2O3 = 0.15%)–polyethylene glycol combinations were used for co-axial cooling experimentation. From the heat transfer analysis, it is observed that nanofluid (Al2O3 = 0.15%) and kerosene combination produces maximum critical heat flux due to the alteration of thermophysical and interfacial properties, which enhance the driving force and flow behavior defining momentum and thermal diffusivities in the favorable direction of heat transfer, respectively. In addition to the above, the comparative study ensures a significant reduction in coolant consumption and augmentation in uniformity in heat flux distribution.

Determination of Convective Heat Flux on Steady-State Heat Transfer Surfaces With Arbitrarily Specified Boundaries

1996 ◽  
Vol 118 (4) ◽  
pp. 850-856 ◽  
Author(s):  
B. G. Wiedner ◽  
C. Camci
Keyword(s):  
Heat Transfer ◽  
Heat Flux ◽  
Steady State ◽  
Film Cooling ◽  
Flux Distribution ◽  
Heat Flux Distribution ◽  
Steady State Heat ◽  
Steady State Heat Transfer ◽  
Film Cooling Holes

The present study focuses on the high-resolution determination of local heat flux distributions encountered in forced convection heat transfer studies. The specific method results in an uncertainty level less than 4 percent of the heat transfer coefficient on surfaces with arbitrarily defined geometric boundaries. Heat transfer surfaces constructed for use in steady-state techniques typically use rectangular thin foil electric heaters to generate a constant heat flux boundary condition. There are also past studies dealing with geometrically complex heating elements. Past studies have either omitted the nonuniform heat flux regions or applied correctional techniques that are approximate. The current study combines electric field theory and a finite element method to solve directly for a nonuniform surface heat flux distribution due to the specific shape of the heater boundary. Heat generation per unit volume of the surface heater element in the form of local Joule heating is accurately calculated using a finite element technique. The technique is shown to be applicable to many complex convective heat transfer configurations. These configurations often have complex geometric boundaries such as turbine endwall platforms, surfaces disturbed by film cooling holes, blade tip sections, etc. A complete high-resolution steady-state heat transfer technique using liquid crystal thermography is presented for the endwall surface of a 90 deg turning duct. The inlet flow is fully turbulent with an inlet Re number of 360,000. The solution of the surface heat flux distribution is also demonstrated for a heat transfer surface that contains an array of discrete film cooling holes. The current method can easily be extended to any heat transfer surface that has arbitrarily prescribed boundaries.

Ray-Thermal Sequential Coupled Heat Transfer ANALYSIS of Porous Media Receiver for Solar Dish Collector

2013 ◽  
Vol 442 ◽  
pp. 169-175 ◽  
Author(s):  
Fu Qiang Wang
Keyword(s):  
Heat Transfer ◽  
Boundary Condition ◽  
Heat Flux ◽  
Porous Media ◽  
Flux Distribution ◽  
Heat Transfer Analysis ◽  
Uniform Heat Flux ◽  
Heat Flux Distribution ◽  
Uniform Heat ◽  
Distribution Boundary

For the sake of reflecting the concentrated heat flux distribution boundary condition as genuine as possible during simulation, the sequential coupled optical-thermal heat transfer analysis is introduced for porous media receiver. During the sequential coupled numerical analysis, the non-uniform heat flux distribution on the fluid entrance surface of porous media receiver is obtained by Monte-Carlo ray tracing method. Finite element method (FEM) is adopted to solve energy equation using the calculated heat flux distribution as the third boundary condition. The dimensionless temperature distribution comparisons between uniform and non-uniform heat flux distribution boundary conditions, various porosities, and different solar dish concentrator tracking errors are investigated in this research.

scholarly journals Gravity darkening in late-type stars

2018 ◽  
Vol 609 ◽  
pp. A124 ◽  
Author(s):  
R. Raynaud ◽  
M. Rieutord ◽  
L. Petitdemange ◽  
T. Gastine ◽  
B. Putigny
Keyword(s):  
Heat Transfer ◽  
Heat Flux ◽  
Nusselt Number ◽  
Coriolis Force ◽  
Flux Distribution ◽  
Parameter Study ◽  
Rossby Number ◽  
Heat Flux Distribution ◽  
Convective Envelope ◽  
Background Density

Context. Recent interferometric data have been used to constrain the brightness distribution at the surface of nearby stars, in particular the so-called gravity darkening that makes fast rotating stars brighter at their poles than at their equator. However, good models of gravity darkening are missing for stars that posses a convective envelope. Aim. In order to better understand how rotation affects the heat transfer in stellar convective envelopes, we focus on the heat flux distribution in latitude at the outer surface of numerical models. Methods. We carry out a systematic parameter study of three-dimensional, direct numerical simulations of anelastic convection in rotating spherical shells. As a first step, we neglect the centrifugal acceleration and retain only the Coriolis force. The fluid instability is driven by a fixed entropy drop between the inner and outer boundaries where stress-free boundary conditions are applied for the velocity field. Restricting our investigations to hydrodynamical models with a thermal Prandtl number fixed to unity, we consider both thick and thin (solar-like) shells, and vary the stratification over three orders of magnitude. We measure the heat transfer efficiency in terms of the Nusselt number, defined as the output luminosity normalised by the conductive state luminosity. Results. We report diverse Nusselt number profiles in latitude, ranging from brighter (usually at the onset of convection) to darker equator and uniform profiles. We find that the variations of the surface brightness are mainly controlled by the surface value of the local Rossby number: when the Coriolis force dominates the dynamics, the heat flux is weakened in the equatorial region by the zonal wind and enhanced at the poles by convective motions inside the tangent cylinder. In the presence of a strong background density stratification however, as expected in real stars, the increase of the local Rossby number in the outer layers leads to uniformisation of the surface heat flux distribution.

Detailed Investigation of Heat Flux Measurements Made in a Standard Propane-Air Fire-Certification Burner Compared to Levels Derived From a Low-Temperature Analogue Burner

2003 ◽  
Author(s):  
Abd. Rahim Abu Talib ◽  
Andrew J. Neely ◽  
Peter T. Ireland ◽  
Andrew J. Mullender
Keyword(s):  
Heat Transfer ◽  
Heat Flux ◽  
Low Temperature ◽  
Flux Distribution ◽  
Heat Flux Distribution ◽  
Adiabatic Wall ◽  
Single Location ◽  
Aero Engine ◽  
Successful Design ◽  
Flux Measurements

This paper presents detailed heat flux measurements to a flat plate from an ISO2685 [1] standard, large propane fuelled burner used throughout the industry in aero-engine fire-certification. The authors have developed a custom-built heat transfer gauge to measure the heat flux from the burner under isothermal wall conditions. The heat flux from the standard burner is normally calibrated using either a watercooled copper tube or a Gardon gauge, each positioned at a single location. There are no reports in the literature of a detailed survey of heat flux distribution for the burner and the results are therefore of great interest to thermal engineers. These measurements provide benchmark data to allow the heat flux distribution from the ISO burner to be compared to levels derived from the low-temperature analogue burner developed by the authors. The analogue burner uses liquid crystals to measure heat transfer coefficient and adiabatic wall temperature on scale models of engine components and provides key data to facilitate the successful design of components used in fire zones. The objective of this paper is to further validate the low-temperature analogue burner technique developed by the authors which simulates the standard large propane-air burner for fire-certification in aero engine.

Sign in / Sign up

Export Citation Format

Share Document