Liquid-phase axial dispersion of turbulent gas-liquid co-current flow through screen-type static mixers

AIChE Journal ◽  
2016 ◽  
Vol 63 (4) ◽  
pp. 1390-1403 ◽  
Author(s):  
Fouad Azizi ◽  
Khaled Abou Hweij
Keyword(s):  
Liquid Phase ◽  
Current Flow ◽  
Axial Dispersion ◽  
Static Mixers ◽  
Flow Through

Axial dispersion of the liquid phase in vertical tubular contactors with static mixers

1986 ◽  
Vol 51 (9) ◽  
pp. 1925-1932 ◽  
Author(s):  
Marie Fialová ◽  
Karl-Heinz Redlich ◽  
Kurt Winkler
Keyword(s):  
Liquid Phase ◽  
Single Phase ◽  
Flow System ◽  
Axial Dispersion ◽  
Cocurrent Flow ◽  
Phase Flow ◽  
Static Mixer ◽  
Two Phase ◽  
Static Mixers ◽  
Phase Water

Axial dispersion characteristics in the liquid phase have been determined for three selected types of static mixers using the impulse response technique in a vertical tubular contactor for single phase (water) and two phase (water-air, cocurrent flow arrangement) systems. The character of the measured dependences for individual types of static mixers has been found different and also corresponding values of axial dispersion have been found significant. From the stand point of axial dispersion the behaviour of the static mixer under the two phase flow has been found different from its behaviour in the single phase flow system.

THE EFFECT OF OXYGEN ADSORPTION ON THE CONDUCTIVITY OF PBTE FILMS.

2020 ◽  
Vol 6 (8(77)) ◽  
pp. 21-23
Author(s):  
S.N. Sarmasov ◽  
R.Sh. Rahimov ◽  
T.Sh. Abdullayev
Keyword(s):  
Spectral Region ◽  
Current Flow ◽  
Oxygen Adsorption ◽  
Tunneling Mechanism ◽  
Pn Junction ◽  
Flow Through ◽  
Pn Junctions ◽  
Effect Of Oxygen

The effect of oxygen adsorption on the conductivity of PbTe films is studied. Pn junctions based on PbTe films are photosensitive in the IR spectral region with a maximum photosensitivity of 𝜆𝑚𝑎𝑥 microns. The tunneling mechanism of current flow through the pn junction is shown.

Water Temperature Control Using PID Control System Based on LabVIEW

2016 ◽  
Vol 4 (2) ◽  
pp. 35-46
Author(s):  
Ari Ramadhani
Keyword(s):  
Water Temperature ◽  
Pid Control ◽  
Temperature Sensor ◽  
Pid Controller ◽  
Current Flow ◽  
Electrical Energy ◽  
Heating Process ◽  
Water Heater ◽  
Digital Thermometer ◽  
Flow Through

Abstract - Automatic system have grown widespread across all sector so do water heater. Traditionally, heating water is done by utilizing fire as heat source. As the growing of technology, the heating process could be done by manipulating electrical energy by convert it to heat. Electrical energy is flown to a metal rod that contact directly with the water which increase the water temperature. On some case, appropiate water temperature is needed. Altough, a thermometer is needed to read the actual temperature as a feedback value for the system and a system that can control the electricity current flow through the heater that the heat produced is linear to the current flow. With implementing microcontroller as a process node for generating PWM signal, this problem can be solved. Also, Labview is needed as an interface for monitoring and bursting an output which have been processed by Proportional, Integral, and Devivative (PID) controller to producing accurate and stable heat. Based on the results of testing, the system is able to provide a rapid response to any changes that occur, both changes in set-point and changes in water temperature (actual value). Another test is done by comparing the temperature value detected by the temperature sensor in this device with an external digital thermometer placed in the same place, and from some of the tests the temperature value detected by the temperature sensor in this device has a difference of ± 0.19 ℃ with a digital thermometer. Keyword : Water Heater, Thermometer, Microcontroller, LabView, PID.

Axial dispersion in the liquid phase in a horizontal two-phase tube reactor

1991 ◽  
Vol 56 (6) ◽  
pp. 1249-1252
Author(s):  
Marie Fialová ◽  
Ctirad Verner ◽  
Lothar Ebner
Keyword(s):  
Liquid Phase ◽  
Flow Regimes ◽  
Basic Flow ◽  
Axial Dispersion ◽  
Two Phase ◽  
Tube Reactor

The characteristics of axial dispersion in the liquid phase were measured for two basic flow regimes in a horizontal two-phase tube reactor. The data obtained indicate that in some flow regions, axial dispersion can be quite significant.

scholarly journals Removal of Tramp Elements within 7075 Alloy by Super-Gravity Aided Rheorefining Method

Metals ◽  
2018 ◽  
Vol 8 (9) ◽  
pp. 701 ◽  
Author(s):  
Lei Guo ◽  
Xiaochun Wen ◽  
Qipeng Bao ◽  
Zhancheng Guo
Keyword(s):  
Heat Treatment ◽  
Liquid Phase ◽  
7075 Aluminum Alloy ◽  
Total Removal ◽  
Tramp Element ◽  
Removal Ratio ◽  
Gravity Coefficient ◽  
Flow Through ◽  
Solid Phases ◽  
7075 Alloy

An investigation was made on the super-gravity aided rheorefining process of recycled 7075 aluminum alloy in order to remove tramp elements. The separation temperatures in this study were selected as 609 °C, 617 °C and 625 °C. And the gravity coefficients were set as 400 G, 700 G, 1000 G. The finely distributed impurity inclusions will aggregate to the grain boundaries of Al-enriched phase during heat treatment. In the field of super-gravity, the liquid phase composed of tramp elements Zn, Cu, Mg et al. will flow through the gaps between solid Al-enriched grains and form into filtrate. Both the weight of filtrate and removal ratio of tramp element improved with the increase of gravity coefficient. The total removal ratio of tramp element decreased with the fall of temperature due to the flowability deterioration of liquid phase. The time for effective separation of liquid/solid phases with super-gravity can be restricted within 1 min.

Current flow through a nonuniform metal-GaAs contact

2003 ◽  
Author(s):  
A.A. Belyaev ◽  
G.K. Beketov ◽  
G.E. Chaika ◽  
R.V. Konakova ◽  
V.G. Lyapin ◽  
...  
Keyword(s):  
Current Flow ◽  
Flow Through

Scanning tunneling spectroscopy under large current flow through the sample

2011 ◽  
Vol 82 (7) ◽  
pp. 073710 ◽  
Author(s):  
A. Maldonado ◽  
I. Guillamón ◽  
H. Suderow ◽  
S. Vieira
Keyword(s):  
Current Flow ◽  
Scanning Tunneling Spectroscopy ◽  
Tunneling Spectroscopy ◽  
Scanning Tunneling ◽  
Large Current ◽  
Flow Through

Structural and Electrical Properties of Titania Thin Films

2014 ◽  
Vol 925 ◽  
pp. 300-303 ◽  
Author(s):  
Sharipah Nadzirah ◽  
Uda Hashim ◽  
N. Malihah
Keyword(s):  
Thin Films ◽  
Electrical Conductivity ◽  
Titanium Dioxide ◽  
Current Flow ◽  
Sol Gel ◽  
Particle Sizes ◽  
Structural And Electrical Properties ◽  
Crystallite Sizes ◽  
Average Current ◽  
Flow Through

This research studies the properties of titanium dioxide (TiO2) nanoparticles synthesized by two different stabilizers via sol-gel method. Acetic and hydrochloric acids have been used as stabilizers to form two different TiO2 thin films. 100 μm gap of Al IDEs have been fabricated on each annealed TiO2 films. Finally the samples were physically and electrically characterized. Average crystallite sizes of the nanoparticles are 20 and 25 nm for acetic and hydrochloric acid respectively. The average current flow through the devices was extremely small which are around micro-to-nanoampere. It was found that the electrical conductivity increased significantly when particle sizes decreases.

scholarly journals A model of tight junction function in central nervous system myelinated axons

2008 ◽  
Vol 4 (4) ◽  
pp. 307-317 ◽  
Author(s):  
Alexander Gow ◽  
Jerome Devaux
Keyword(s):  
Current Flow ◽  
Large Diameter ◽  
Small Diameter ◽  
Structural Features ◽  
Axonal Membrane ◽  
Flow Through ◽  
Saltatory Conduction ◽  
Gait Abnormalities ◽  
Low Capacitance ◽  
Speed And Accuracy

The insulative properties of myelin sheaths in the central and peripheral nervous systems (CNS and PNS) are widely thought to derive from the high resistance and low capacitance of the constituent membranes. Although this view adequately accounts for myelin function in large diameter fibers, it poorly reflects the behavior of small fibers that are prominent in many regions of the CNS. Herein, we develop a computational model to more accurately represent conduction in small fibers. By incorporating structural features that, hitherto, have not been simulated, we demonstrate that myelin tight junctions (TJs) improve saltatory conduction by reducing current flow through the myelin, limiting axonal membrane depolarization and restraining the activation of ion channels beneath the myelin sheath. Accordingly, our simulations provide a novel view of myelin by which TJs minimize charging of the membrane capacitance and lower the membrane time constant to improve the speed and accuracy of transmission in small diameter fibers. This study establishes possible mechanisms whereby TJs affect conduction in the absence of overt perturbations to myelin architecture and may in part explain the tremor and gait abnormalities observed in Claudin 11-null mice.

Sign in / Sign up

Export Citation Format

Share Document