Flexible Perovskite Photovoltaic Modules and Solar Cells Based on Atomic Layer Deposited Compact Layers and UV-Irradiated TiO2Scaffolds on Plastic Substrates

2015 ◽  
Vol 5 (8) ◽  
pp. 1401808 ◽  
Author(s):  
Francesco Di Giacomo ◽  
Valerio Zardetto ◽  
Alessandra D'Epifanio ◽  
Sara Pescetelli ◽  
Fabio Matteocci ◽  
...  
NANO ◽  
2014 ◽  
Vol 09 (05) ◽  
pp. 1440011 ◽  
Author(s):  
BOEUN KIM ◽  
YUELONG LI ◽  
HEESUK JUNG ◽  
JIN YOUNG KIM ◽  
DOH-KWON LEE ◽  
...  

In order to improve the interconnection of TiO 2 photoelectrode for the flexible dye-sensitized solar cells (DSSCs) with plastic substrates, thin TiO 2 layers are additionally introduced to the surface of main TiO 2 nanoparticles by atomic layer deposition (ALD) at low temperature. The ALD-induced TiO 2 thin layers on porous films effectively reduced the internal electrical resistance, leading to the facilitated electron transport in DSSCs. As a result, DSSCs with ALD-induced TiO 2 thin layers (thickness of ~ 1.5 nm) showed better power conversion efficiency of 3.09%, which is 33% enhancement compared with that without ALD-induced TiO 2 thin layers (2.32%).


Solar RRL ◽  
2020 ◽  
Vol 4 (10) ◽  
pp. 2000241
Author(s):  
Geedhika K. Poduval ◽  
Leiping Duan ◽  
Md. Anower Hossain ◽  
Borong Sang ◽  
Yu Zhang ◽  
...  

Solar RRL ◽  
2021 ◽  
pp. 2100181
Author(s):  
Yali Sun ◽  
Pengfei Qiu ◽  
Siyu Wang ◽  
Hongling Guo ◽  
Rutao Meng ◽  
...  

2015 ◽  
Vol 2015 ◽  
pp. 1-7 ◽  
Author(s):  
Wonwook Oh ◽  
Seongtak Kim ◽  
Soohyun Bae ◽  
Nochang Park ◽  
Sung-Il Chan ◽  
...  

We investigated the migration of Sn and Pb onto the Ag fingers of crystalline Si solar cells in photovoltaic modules aged in field for 6 years. Layers of Sn and Pb were found on the Ag fingers down to the edge of the solar cells. This phenomenon is not observed in a standard acceleration test condition for PV modules. In contrast to the acceleration test conditions, field aging subjects the PV modules to solar irradiation and moisture condensation at the interface between the solar cells and the encapsulant. The solder ribbon releases Sn and Pb via repeated galvanic corrosion and the Sn and Pb precipitate on Ag fingers due to the light-induced plating under solar irradiation.


2021 ◽  
Author(s):  
Ran Zhao ◽  
Kai Zhang ◽  
Jiahao Zhu ◽  
Shuang Xiao ◽  
Wei Xiong ◽  
...  

Interface passivation is of the pivot to achieve high-efficiency organic metal halide perovskite solar cells (PSCs). Atomic layer deposition (ALD) of wide band gap oxides has recently shown great potential...


Sign in / Sign up

Export Citation Format

Share Document