scholarly journals Optical Fibers: The Optical Fiber Tip: An Inherently Light-Coupled Microscopic Platform for Micro- and Nanotechnologies (Adv. Mater. 23/2014)

2014 ◽  
Vol 26 (23) ◽  
pp. 3797-3797 ◽  
Author(s):  
Gorgi Kostovski ◽  
Paul R. Stoddart ◽  
Arnan Mitchell
Keyword(s):  
Optical Fiber ◽  
Optical Fibers

Heating and Burning of Optical Fibers and Cables by Light Scattered from Bubble Train Formed by Optical Fiber Fuse

2012 ◽  
Vol E95.B (8) ◽  
pp. 2638-2641 ◽  
Author(s):  
Makoto YAMADA ◽  
Akisumi TOMOE ◽  
Takahiro KINOSHITA ◽  
Osanori KOYAMA ◽  
Yutaka KATUYAMA ◽  
...  
Keyword(s):  
Optical Fiber ◽  
Optical Fibers

scholarly journals Nano- and Micropatterning on Optical Fibers by Bottom-Up Approach: The Importance of Being Ordered

2021 ◽  
Vol 11 (7) ◽  
pp. 3254
Author(s):  
Marco Pisco ◽  
Francesco Galeotti
Keyword(s):  
Optical Fiber ◽  
Optical Fibers ◽  
Self Assembly ◽  
Ordered Structures ◽  
Bottom Up ◽  
Photonic Structures ◽  
Fiber Technology ◽  
Optical Fiber Probes ◽  
Fiber Probes ◽  
Self Assembled

The realization of advanced optical fiber probes demands the integration of materials and structures on optical fibers with micro- and nanoscale definition. Although researchers often choose complex nanofabrication tools to implement their designs, the migration from proof-of-principle devices to mass production lab-on-fiber devices requires the development of sustainable and reliable technology for cost-effective production. To make it possible, continuous efforts are devoted to applying bottom-up nanofabrication based on self-assembly to decorate the optical fiber with highly ordered photonic structures. The main challenges still pertain to “order” attainment and the limited number of implementable geometries. In this review, we try to shed light on the importance of self-assembled ordered patterns for lab-on-fiber technology. After a brief presentation of the light manipulation possibilities concerned with ordered structures, and of the new prospects offered by aperiodically ordered structures, we briefly recall how the bottom-up approach can be applied to create ordered patterns on the optical fiber. Then, we present un-attempted methodologies, which can enlarge the set of achievable structures, and can potentially improve the yielding rate in finely ordered self-assembled optical fiber probes by eliminating undesired defects and increasing the order by post-processing treatments. Finally, we discuss the available tools to quantify the degree of order in the obtained photonic structures, by suggesting the use of key performance figures of merit in order to systematically evaluate to what extent the pattern is really “ordered”. We hope such a collection of articles and discussion herein could inspire new directions and hint at best practices to fully exploit the benefits inherent to self-organization phenomena leading to ordered systems.

Fabrication of Lensed Plastic Optical Fiber Array Using Electrostatic Force

2011 ◽  
Vol 133 (3) ◽  
Author(s):  
Yih-Tun Tseng ◽  
Jhong-Bin Huang ◽  
Che-Hsin Lin ◽  
Chin-Lung Chen ◽  
Wood-Hi Cheng
Keyword(s):  
Optical Fiber ◽  
Optical Fibers ◽  
Electrostatic Force ◽  
Coupling Efficiency ◽  
Numerical Aperture ◽  
Uv Curing ◽  
Power Budget ◽  
Fiber Array ◽  
Plastic Optical Fibers ◽  
Efficient Coupling

The GI (graded-index) POFs (Plastic optical fibers), which has been proven to reach distances as long as 1 km at 1.25 Gb/s has a relatively low numerical aperture . Therefore, the efficient coupling of GI POFs to the light source has become critical to the power budget in the system. Efficient coupling for a POFs system normally involves either a separate lens or the direct formation of the lens at the end of the fiber. Forming the lens-like structure directly on the fiber end is preferred for simplicity of fabrication and packaging, such as polishing and fusion, combine different fibers with the cascaded fiber method and hydroflouride (HF) chemical etching. These approaches are well established, but applicable only to glass. Optical assembly architecture for multichannel fibers and optical devices is critical to optical fiber interconnections. Multichannel fiber-pigtail laser diode (LD) modules have potential for supporting higher data throughput and longer transmission distances. However, to be of practical use, these modules must be more precise. This work proposes and manufactures lensed plastic optical fibers (LPOF) array. This novel manipulation can be utilized to fabricate an aspherical lens on a fiber array after the UV curing of the photo-sensitive polymer; the coupling efficiency (CE) is increased and exceeds 47% between the LD array and the fiber array.

scholarly journals Multiple Light Coupling and Routing via a Microspherical Resonator Integrated in a T-Shaped Optical Fiber Configuration System

Micromachines ◽  
2018 ◽  
Vol 9 (10) ◽  
pp. 521 ◽  
Author(s):  
Georgia Konstantinou ◽  
Karolina Milenko ◽  
Kyriaki Kosma ◽  
Stavros Pissadakis
Keyword(s):  
Optical Fiber ◽  
Optical Fibers ◽  
Single Mode ◽  
Equatorial Region ◽  
Experimental Results ◽  
Glass Microsphere ◽  
Single Mode Optical Fiber ◽  
Light Coupling ◽  
Fiber Taper ◽  
Optical Fiber Taper

We demonstrate a three-port, light guiding and routing T-shaped configuration based on the combination of whispering gallery modes (WGMs) and micro-structured optical fibers (MOFs). This system includes a single mode optical fiber taper (SOFT), a slightly tapered MOF and a BaTiO3 microsphere for efficient light coupling and routing between these two optical fibers. The BaTiO3 glass microsphere is semi-immersed into one of the hollow capillaries of the MOF taper, while the single mode optical fiber taper is placed perpendicularly to the latter and in contact with the equatorial region of the microsphere. Experimental results are presented for different excitation and reading conditions through the WGM microspherical resonator, namely, through single mode optical fiber taper or the MOF. The experimental results indicate that light coupling between the MOF and the single mode optical fiber taper is facilitated at specific wavelengths, supported by the light localization characteristics of the BaTiO3 glass microsphere, with spectral Q-factors varying between 4.5 × 103 and 6.1 × 103, depending on the port and parity excitation.

Location of Optical Fibers for the Calibration of Incoherent Optical Fiber Bundles for Image Transmission

2009 ◽  
Vol 58 (9) ◽  
pp. 2996-3003 ◽  
Author(s):  
P.R. Fernandez ◽  
J.L. Lazaro ◽  
A. Gardel ◽  
O. Esteban ◽  
A.E. Cano ◽  
...  
Keyword(s):  
Optical Fiber ◽  
Optical Fibers ◽  
Image Transmission ◽  
Fiber Bundles

scholarly journals Study of Ho:YAG Laser Generated Underwater Shock Waves and Cavity Bubble for Revascularization Therapy

2000 ◽  
Author(s):  
S. H. R. Hosseini ◽  
T. Hirano ◽  
O. Onodera ◽  
K. Takayama
Keyword(s):  
Shock Wave ◽  
Shock Waves ◽  
Optical Fiber ◽  
Optical Fibers ◽  
Early Stage ◽  
Underwater Shock Wave ◽  
Ho:Yag Laser ◽  
Direct Laser ◽  
Order Of Magnitude ◽  
Underwater Shock

Abstract For applying shock waves to precise medical procedures like neurosurgery, a reliable generation of micro shock waves is required. Such sensitive applications make limits on usage of conventional underwater shock wave sources like Extracoporeal Shock Waves ESW [1] or micro explosives [2]. In the present study a Q-switched Ho:YAG laser and an optical fiber are used. Advantages of this method over previous shock wave sources are two order of magnitude reduction in focusing area if compared with ESW and elimination of product gases of micro explosives. Nakahara and Nagayama [3] studied underwater shock waves emanated from surface of an optical fiber by pulse Nd:YAG laser input using shadowgraph technique. Their qualitative study limited to visualization of shock waves at its early stage. The present research aims to clarify quantitatively process of the shock wave generation by direct laser beam irradiation through optical fibers, growth and behavior of generated cavities, and structure of heat induced flow in front of the optical fiber.

scholarly journals Microdrilled tapers to enhance optical fiber lasers for sensing

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
R. A. Perez-Herrera ◽  
M. Bravo ◽  
P. Roldan-Varona ◽  
D. Leandro ◽  
L. Rodriguez-Cobo ◽  
...  
Keyword(s):  
Optical Fiber ◽  
Optical Fibers ◽  
Fiber Lasers ◽  
Signal To Noise Ratio ◽  
Power Level ◽  
Single Mode ◽  
Optical Signal ◽  
Single Mode Fiber ◽  
Output Power Level ◽  
Linear Cavity

AbstractIn this work, an experimental analysis of the performance of different types of quasi-randomly distributed reflectors inscribed into a single-mode fiber as a sensing mirror is presented. These artificially-controlled backscattering fiber reflectors are used in short linear cavity fiber lasers. In particular, laser emission and sensor application features are analyzed when employing optical tapered fibers, micro-drilled optical fibers and 50 μm-waist or 100 μm-waist micro-drilled tapered fibers (MDTF). Single-wavelength laser with an output power level of about 8.2 dBm and an optical signal-to-noise ratio of 45 dB were measured when employing a 50 μm-waist micro-drilled tapered optical fiber. The achieved temperature sensitivities were similar to those of FBGs; however, the strain sensitivity improved more than one order of magnitude in comparison with FBG sensors, attaining slope sensitivities as good as 18.1 pm/με when using a 50 μm-waist MDTF as distributed reflector.

scholarly journals Damage detection in laminar thermoplastic composite materials by means of embedded optical fibers

2006 ◽  
Vol 60 (7-8) ◽  
pp. 176-179
Author(s):  
Aleksandar Kojovic ◽  
Irena Zivkovic ◽  
Ljiljana Brajovic ◽  
Dragan Mitrakovic ◽  
Radoslav Aleksic
Keyword(s):  
Composite Materials ◽  
Optical Fiber ◽  
Real Time ◽  
Optical Fibers ◽  
Impact Damage ◽  
Experimental Testing ◽  
Low Energy ◽  
Thermoplastic Composite ◽  
Woven Fabric ◽  
The Impact

This paper investigates the possibility of applying optical fibers as sensors for investigating low energy impact damage in laminar thermoplastic composite materials, in real time. Impact toughness testing by a Charpy impact pendulum with different loads was conducted in order to determine the method for comparative measurement of the resulting damage in the material. For that purpose intensity-based optical fibers were built in to specimens of composite materials with Kevlar 129 (the DuPont registered trade-mark for poly(p-phenylene terephthalamide)) woven fabric as reinforcement and thermoplastic PVB (poly(vinyl butyral)) as the matrix. In some specimens part of the layers of Kevlar was replaced with metal mesh (50% or 33% of the layers). Experimental testing was conducted in order to observe and analyze the response of the material under multiple low-energy impacts. Light from the light-emitting diode (LED) was launched to the embedded optical fiber and was propagated to the phototransistor-based photo detector. During each impact, the signal level, which is proportional to the light intensity in the optical fiber, drops and then slowly recovers. The obtained signals were analyzed to determine the appropriate method for real time damage monitoring. The major part of the damage occurs during impact. The damage reflects as a local, temporary release of strain in the optical fiber and an increase of the signal level. The obtained results show that intensity-based optical fibers could be used for measuring the damage in laminar thermoplastic composite materials. The acquired optical fiber signals depend on the type of material, but the same set of rules (relatively different, depending on the type of material) could be specified. Using real time measurement of the signal during impact and appropriate analysis enables quantitative evaluation of the impact damage in the material. Existing methods in most cases use just the intensity of the signal before and after the impact, as the measure of damage. This method could be used to monitor the damage in real time, giving warnings before fatal damage occurs.

Sign in / Sign up

Export Citation Format

Share Document