Phosphate‐Mediated Immobilization of High‐Performance AuPd Nanoparticles for Dehydrogenation of Formic Acid at Room Temperature

2019 ◽  
Vol 29 (39) ◽  
pp. 1903341 ◽  
Author(s):  
Qiuju Wang ◽  
Liyu Chen ◽  
Zheng Liu ◽  
Nobuko Tsumori ◽  
Mitsunori Kitta ◽  
...  
Keyword(s):  
Formic Acid ◽  
High Performance ◽  
Room Temperature

High Performance Optoelectronic Devices Based on Bright Perovskite Nanocrystals Synthesized at Room Temperature

2018 ◽  
Author(s):  
Sotirios Christodoulou ◽  
Francesco Di Stasio ◽  
Santanu Pradhan ◽  
Inigo Ramiro ◽  
Yu Bi ◽  
...  
Keyword(s):  
High Performance ◽  
Room Temperature ◽  
Optoelectronic Devices ◽  
Perovskite Nanocrystals

Star-shaped arylacetylene resins derived from silicon

2020 ◽  
Vol 40 (8) ◽  
pp. 676-684
Author(s):  
Niping Dai ◽  
Junkun Tang ◽  
Manping Ma ◽  
Xiaotian Liu ◽  
Chuan Li ◽  
...  
Keyword(s):  
High Performance ◽  
Room Temperature ◽  
Mechanical Test ◽  
Flexural Modulus ◽  
Mechanical Analysis ◽  
Reinforced Composites ◽  
Scanning Calorimetry ◽  
Chemical Structures ◽  
Structures And Properties ◽  
High Performance Resin

AbstractStar-shaped arylacetylene resins, tris(3-ethynyl-phenylethynyl)methylsilane, tris(3-ethynyl-phenylethynyl) phenylsilane, and tris (3-ethynyl-phenylethynyl) silane (TEPHS), were synthesized through Grignard reaction between 1,3-diethynylbenzene and three types of trichlorinated silanes. The chemical structures and properties of the resins were characterized by means of nuclear magnetic resonance, fourier-transform infrared spectroscopy, Haake torque rheomoter, differential scanning calorimetry, dynamic mechanical analysis, mechanical test, and thermogravimetric analysis. The results show that the melt viscosity at 120 °C is lower than 150 mPa⋅s, and the processing windows are as wide as 60 °C for the resins. The resins cure at the temperature as low as 150 °C. The good processabilities make the resins to be suitable for resin transfer molding. The cured resins exhibit high flexural modulus and excellent heat-resistance. The flexural modulus of the cured TEPHS at room temperature arrives at as high as 10.9 GPa. Its temperature of 5% weight loss (Td5) is up to 697 °C in nitrogen. The resins show the potential for application in fiber-reinforced composites as high-performance resin in the field of aviation and aerospace.

scholarly journals Determination of 19 Psychoactive Substances in Premortem and Postmortem Whole Blood Samples Using Ultra-High-Performance Liquid Chromatography–Tandem Mass Spectrometry

Separations ◽  
2021 ◽  
Vol 8 (6) ◽  
pp. 78
Author(s):  
Sevasti Karampela ◽  
Jessica Smith ◽  
Irene Panderi
Keyword(s):  
High Performance Liquid Chromatography ◽  
Liquid Chromatography ◽  
Formic Acid ◽  
Whole Blood ◽  
High Performance ◽  
Tandem Mass ◽  
Psychoactive Substances ◽  
Blood Samples ◽  
Whole Blood Samples

An ever-increasing need exists within the forensic laboratories to develop analytical processes for the qualitative and quantitative determination of a broad spectrum of new psychoactive substances. Phenylethylamine derivatives are among the major classes of psychoactive substances available on the global market and include both amphetamine analogues and synthetic cathinones. In this work, an ultra-high-performance liquid chromatography-positive ion electrospray ionization tandem mass spectrometric method (UHPLC-ESI-MS/MS) has been developed and fully validated for the determination of 19 psychoactive substances, including nine amphetamine-type stimulants and 10 synthetic cathinone derivatives, in premortem and postmortem whole blood. The assay was based on the use of 1 mL premortem or postmortem whole blood, following solid phase extraction prior to the analysis. The separation was achieved on a Poroshell 120 EC-C18 analytical column with a gradient mobile phase of 0.1% formic acid in acetonitrile and 0.1% formic acid in water in 9 min. The dynamic multiple reaction monitoring used in this work allowed for limit of detection (LOD) and lower limit of quantitation (LOQ) values of 0.5 and 2 ng mL−1, respectively, for all analytes both in premortem and postmortem whole blood samples. A quadratic calibration model was used for the 12 quantitative analytes over the concentration range of 20–2000 ng mL−1, and the method was shown to be precise and accurate both in premortem and postmortem whole blood. The method was applied to the analysis of real cases and proved to be a valuable tool in forensic and clinical toxicology.

scholarly journals Lateral PbS Photovoltaic Devices for High Performance Infrared and Terahertz Photodetectors

Nanomaterials ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 1692
Author(s):  
Emmanuel K. Ampadu ◽  
Jungdong Kim ◽  
Eunsoon Oh
Keyword(s):  
High Performance ◽  
Room Temperature ◽  
Photovoltaic Device ◽  
Photovoltaic Devices ◽  
Temperature Spectrum ◽  
Terahertz Region ◽  
Room Temperature Spectrum ◽  
Ftir Spectrometer ◽  
Titanium Substrates ◽  
Deposition Conditions

We fabricated a lateral photovoltaic device for use as infrared to terahertz (THz) detectors by chemically depositing PbS films on titanium substrates. We discussed the material properties of PbS films grown on glass with varying deposition conditions. PbS was deposited on Ti substrates and by taking advantage of the Ti/PbS Schottky junction, we discussed the photocurrent transients as well as the room temperature spectrum response measured by Fourier transform infrared (FTIR) spectrometer. Our photovoltaic PbS device operates at room temperature for wavelength ranges up to 50 µm, which is in the terahertz region, making the device highly applicable in many fields.

scholarly journals A Process for Hydrogen Production from the Catalytic Decomposition of Formic Acid over Iridium—Palladium Nanoparticles

Materials ◽  
2021 ◽  
Vol 14 (12) ◽  
pp. 3258
Author(s):  
Hamed M. Alshammari ◽  
Mohammad Hayal Alotaibi ◽  
Obaid F. Aldosari ◽  
Abdulellah S. Alsolami ◽  
Nuha A. Alotaibi ◽  
...  
Keyword(s):  
Hydrogen Production ◽  
Formic Acid ◽  
Activated Charcoal ◽  
Palladium Nanoparticles ◽  
Room Temperature ◽  
Catalytic Decomposition ◽  
Conversion Yield ◽  
Production Of Hydrogen ◽  
Commercial Applications

The present study investigates a process for the selective production of hydrogen from the catalytic decomposition of formic acid in the presence of iridium and iridium–palladium nanoparticles under various conditions. It was found that a loading of 1 wt.% of 2% palladium in the presence of 1% iridium over activated charcoal led to a 43% conversion of formic acid to hydrogen at room temperature after 4 h. Increasing the temperature to 60 °C led to further decomposition and an improvement in conversion yield to 63%. Dilution of formic acid from 0.5 to 0.2 M improved the decomposition, reaching conversion to 81%. The reported process could potentially be used in commercial applications.

scholarly journals Room-Temperature Solution-Processed 0D/1D Bilayer Electrodes for Translucent CsPbBr3 Perovskite Photovoltaics

Nanomaterials ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 1489
Author(s):  
Bhaskar Parida ◽  
Saemon Yoon ◽  
Dong-Won Kang
Keyword(s):  
Solar Cells ◽  
Indium Tin Oxide ◽  
High Performance ◽  
Room Temperature ◽  
Low Cost ◽  
Perovskite Solar Cells ◽  
Ambient Air ◽  
Plasma Damage ◽  
Temperature Solution ◽  
Ito Nanoparticles

Materials and processing of transparent electrodes (TEs) are key factors to creating high-performance translucent perovskite solar cells. To date, sputtered indium tin oxide (ITO) has been a general option for a rear TE of translucent solar cells. However, it requires a rather high cost due to vacuum process and also typically causes plasma damage to the underlying layer. Therefore, we introduced TE based on ITO nanoparticles (ITO-NPs) by solution processing in ambient air without any heat treatment. As it reveals insufficient conductivity, Ag nanowires (Ag-NWs) are additionally coated. The ITO-NPs/Ag-NW (0D/1D) bilayer TE exhibits a better figure of merit than sputtered ITO. After constructing CsPbBr3 perovskite solar cells, the device with 0D/1D TE offers similar average visible transmission with the cells with sputtered ITO. More interestingly, the power conversion efficiency of 0D/1D TE device was 5.64%, which outperforms the cell (4.14%) made with sputtered-ITO. These impressive findings could open up a new pathway for the development of low-cost, translucent solar cells with quick processing under ambient air at room temperature.

Sign in / Sign up

Export Citation Format

Share Document