Molecular Design of Unsymmetrical Squaraine Dyes for High Efficiency Conversion of Low Energy Photons into Electrons Using TiO2Nanocrystalline Films

2009 ◽  
Vol 19 (17) ◽  
pp. 2720-2727 ◽  
Author(s):  
Thomas Geiger ◽  
Simon Kuster ◽  
Jun-Ho Yum ◽  
Soo-Jin Moon ◽  
Mohammad K. Nazeeruddin ◽  
...  
Keyword(s):  
High Efficiency ◽  
Molecular Design ◽  
Low Energy ◽  
Squaraine Dyes ◽  
Efficiency Conversion

A Study on the Use of Bipolar-Particles-Electrodes in Decolorization of Dyeing Effluents and Its Principle

1987 ◽  
Vol 19 (3-4) ◽  
pp. 391-400 ◽  
Author(s):  
Zhou Ding ◽  
Cai Wei Min ◽  
Wang Qun Hui
Keyword(s):  
Energy Consumption ◽  
High Efficiency ◽  
Low Energy ◽  
Acid Dyes ◽  
Underlying Principle ◽  
Low Energy Consumption ◽  
Transparent Liquid

This paper studies the use of bipolar-particles-electrodes in the decolorization of dyeing effluents. Treatment of highly colored solutions of various soluble dyes (such as direct, reactive, cationic or acid dyes) and also samples of dyeing effluents gave rise to an almost colorless transparent liquid, with removal of CODcr and BOD5 being as high as over 80%. The method is characterized by its high efficiency, low energy consumption and long performance life. A discussion of the underlying principle is given.

scholarly journals Combination of Dual-Energy X-ray Transmission and Variable Gas-Ejection for the In-Line Automatic Sorting of Many Types of Scrap in One Measurement

2021 ◽  
Vol 11 (10) ◽  
pp. 4349
Author(s):  
Tianzhong Xiong ◽  
Wenhua Ye ◽  
Xiang Xu
Keyword(s):  
High Efficiency ◽  
Nearest Neighbor ◽  
High Energy ◽  
Dual Energy ◽  
Center Of Gravity ◽  
Low Energy ◽  
Identification Accuracy ◽  
Flow Process ◽  
X Ray ◽  
Automatic Sorting

As an important part of pretreatment before recycling, sorting has a great impact on the quality, efficiency, cost and difficulty of recycling. In this paper, dual-energy X-ray transmission (DE-XRT) combined with variable gas-ejection is used to improve the quality and efficiency of in-line automatic sorting of waste non-ferrous metals. A method was proposed to judge the sorting ability, identify the types, and calculate the mass and center-of-gravity coordinates according to the shading of low-energy, the line scan direction coordinate and transparency natural logarithm ratio of low energy to high energy (R_value). The material identification was satisfied by the nearest neighbor algorithm of effective points in the material range to the R_value calibration surface. The flow-process of identification was also presented. Based on the thickness of the calibration surface, the material mass and center-of-gravity coordinates were calculated. The feasibility of controlling material falling points by variable gas-ejection was analyzed. The experimental verification of self-made materials showed that identification accuracy by count basis was 85%, mass and center-of-gravity coordinates calculation errors were both below 5%. The method proposed features high accuracy, high efficiency, and low operation cost and is of great application value even to other solid waste sorting, such as plastics, glass and ceramics.

Preparation of Poly(Lactic Acid) Acrylate for UV-Curable Coating Applications

2015 ◽  
Vol 659 ◽  
pp. 570-574 ◽  
Author(s):  
Apinya Musidang ◽  
Nantana Jiratumnukul
Keyword(s):  
Lactic Acid ◽  
Physical Properties ◽  
High Efficiency ◽  
Low Energy ◽  
Poly Lactic Acid ◽  
Coating Film ◽  
Pencil Hardness ◽  
Uv Curable ◽  
Low Energy Consumption ◽  
Volatile Organic

UV-curable process is widely used for paints, inks and adhesives due to its rapid curing, low energy consumption, high efficiency and low volatile organic compounds (VOCs). The objective of this research is to prepare poly(lactic acid) (PLA) based UV-curable coating by using glycolyzed PLA. PLA was glycolyzed by ethylene glycol (EG) at 170°C for 90 minutes. The obtained glycolyzed PLA was reacted with methacrylic anhydride (MAAH) to provide PLA acrylate oligomer. The obtained PLA acrylate oligomer was used in coating formulations with various amounts of photoinitiator and cured under UV radiation. Physical properties of cured coating film were investigated such as pencil hardness, gloss and haze. The results showed that poly(lactic acid) (PLA) based UV-curable coating provided good physical properties.

scholarly journals Measurement of Ozone Production Sensor

2010 ◽  
Vol 3 (3) ◽  
pp. 545-555 ◽  
Author(s):  
M. Cazorla ◽  
W. H. Brune
Keyword(s):  
Production Rate ◽  
High Efficiency ◽  
Ambient Air ◽  
Ozone Production ◽  
State University ◽  
Photostationary State ◽  
Sample Chamber ◽  
Efficiency Conversion ◽  
The Difference ◽  
Teflon Film

Abstract. A new ambient air monitor, the Measurement of Ozone Production Sensor (MOPS), measures directly the rate of ozone production in the atmosphere. The sensor consists of two 11.3 L environmental chambers made of UV-transmitting Teflon film, a unit to convert NO2 to O3, and a modified ozone monitor. In the sample chamber, flowing ambient air is exposed to the sunlight so that ozone is produced just as it is in the atmosphere. In the second chamber, called the reference chamber, a UV-blocking film over the Teflon film prevents ozone formation but allows other processes to occur as they do in the sample chamber. The air flows that exit the two chambers are sampled by an ozone monitor operating in differential mode so that the difference between the two ozone signals, divided by the exposure time in the chambers, gives the ozone production rate. High-efficiency conversion of NO2 to O3 prior to detection in the ozone monitor accounts for differences in the NOx photostationary state that can occur in the two chambers. The MOPS measures the ozone production rate, but with the addition of NO to the sampled air flow, the MOPS can be used to study the sensitivity of ozone production to NO. Preliminary studies with the MOPS on the campus of the Pennsylvania State University show the potential of this new technique.

Stable kilohertz spark discharges for high-efficiency conversion of methane to hydrogen and acetylene

2008 ◽  
Vol 41 (17) ◽  
pp. 175203 ◽  
Author(s):  
Xiao-Song Li ◽  
Can-Kun Lin ◽  
Chuan Shi ◽  
Yong Xu ◽  
You-Nian Wang ◽  
...  
Keyword(s):  
High Efficiency ◽  
Spark Discharges ◽  
Conversion Of Methane ◽  
Efficiency Conversion

High-Efficiency Conversion of Sputtered Ti Thin Films into TiO[sub 2] Nanotubular Layers

2008 ◽  
Vol 11 (7) ◽  
pp. C37 ◽  
Author(s):  
Steffen Berger ◽  
Jan M. Macak ◽  
Julia Kunze ◽  
Patrik Schmuki
Keyword(s):  
Thin Films ◽  
High Efficiency ◽  
Efficiency Conversion

P-170: Molecular Design of Sensitizer for High Efficiency in Hyper-fluorescent Organic Light-Emitting Diodes

2018 ◽  
Vol 49 (1) ◽  
pp. 1800-1803
Author(s):  
Ji Seon Jang ◽  
Si Hyun Han ◽  
Hye Won Choi ◽  
Kyoung Soo Yook ◽  
Jun Yeob Lee
Keyword(s):  
High Efficiency ◽  
Light Emitting Diodes ◽  
Molecular Design ◽  
Organic Light Emitting Diodes ◽  
Light Emitting ◽  
Organic Light

Structure and properties of powders obtained by electrodispersion of corrosion-resistant metal waste in kerosine

2021 ◽  
pp. 276-281
Author(s):  
E.V. Ageeva ◽  
E.V. Ageev ◽  
A.A. Sysoev
Keyword(s):  
High Efficiency ◽  
Experimental Studies ◽  
Low Energy ◽  
Powder Materials ◽  
Energy Costs ◽  
Structure And Properties ◽  
Corrosion Resistant ◽  
High Chromium ◽  
Metal Waste ◽  
Industrial Use

The results of experimental studies of the structure and properties of electroerosive high-chromium powders obtained in kerosene are presented. The high efficiency of using the electrodispersing technology is shown, which provides for obtaining new corrosion-resistant powder materials suitable for industrial use at low energy costs.

Sign in / Sign up

Export Citation Format

Share Document