Tracking controllers of nonlinear output‐constrained surface ships subjected to external disturbances

2021 ◽  
Author(s):  
Yang Gao ◽  
Zhongcai Zhang ◽  
Linran Tian
Keyword(s):  
External Disturbances ◽  
Tracking Controllers

Robust fault-tolerant flight control of quadrotor against faults in multiple motors

2021 ◽  
pp. 095441002199954
Author(s):  
Dinesh D Dhadekar ◽  
S E Talole
Keyword(s):  
Flight Control ◽  
Tracking Control ◽  
Fault Tolerant ◽  
External Disturbances ◽  
Detection And Identification ◽  
Attitude Tracking ◽  
Fault Detection And Identification ◽  
Attitude Tracking Control ◽  
Disturbance Estimator

In this article, position and attitude tracking control of the quadrotor subject to complex nonlinearities, input couplings, aerodynamic uncertainties, and external disturbances coupled with faults in multiple motors is investigated. A robustified nonlinear dynamic inversion (NDI)-based fault-tolerant control (FTC) scheme is proposed for the purpose. The proposed scheme is not only robust against aforementioned nonlinearities, disturbances, and uncertainties but also tolerant to unexpected occurrence of faults in multiple motors. The proposed scheme employs uncertainty and disturbance estimator (UDE) technique to robustify the NDI-based controller by providing estimate of the lumped disturbance, thereby enabling rejection of the same. In addition, the UDE also plays the role of fault detection and identification module. The effectiveness and benefits of the proposed design are confirmed through 6-DOF simulations and experimentation on a 3-DOF Hover platform.

Uniformly ultimately bounded tracking control of sandwich systems with nonsymmetric sandwiched dead-zone nonlinearity and input saturation constraint

2021 ◽  
pp. 107754632098794
Author(s):  
Meysam Azhdari ◽  
Tahereh Binazadeh
Keyword(s):  
Dead Zone ◽  
Input Saturation ◽  
Closed Loop System ◽  
Unknown Parameters ◽  
External Disturbances ◽  
Uniformly Ultimately Bounded ◽  
Output Tracking ◽  
Saturation Constraint ◽  
Two Phases ◽  
Practical Constraints

This article studies the uniformly ultimately bounded output tracking problem of uncertain nonlinear sandwich systems with sandwiched dead-zone nonlinearity in the presence of some practical constraints such as nonsymmetric input saturation, model uncertainties, time-varying external disturbances, and unknown parameters. Due to the existence of both dead-zone and saturation nonlinearities, the design process is more complicated; therefore, to solve the design complexities, the designing process is divided into two phases. The proposed method leads to output tracking with acceptable accuracy. Moreover, all signals in the closed-loop system are ultimately bounded. Simulation results illustrate the applicability and effectiveness of the proposed method by its application on two practical sandwich systems (robotic system and electrohydraulic servo press system).

scholarly journals New Time-Varying Sliding Surface for Switching Type Quasi-Sliding Mode Control

Energies ◽  
2021 ◽  
Vol 14 (13) ◽  
pp. 3811
Author(s):  
Katarzyna Adamiak ◽  
Andrzej Bartoszewicz
Keyword(s):  
Sliding Mode Control ◽  
Continuous Time ◽  
Sliding Mode ◽  
Representative Point ◽  
Time Varying ◽  
Sliding Surface ◽  
External Disturbances ◽  
Mode Control ◽  
Switching Type ◽  
Time Systems

This study considers the problem of energetical efficiency in switching type sliding mode control of discrete-time systems. The aim of this work is to reduce the quasi-sliding mode band-width and, as follows, the necessary control input, through an application of a new type of time-varying sliding hyperplane in quasi-sliding mode control of sampled time systems. Although time-varying sliding hyperplanes are well known to provide insensitivity to matched external disturbances and uncertainties of the model in the whole range of motion for continuous-time systems, their application in the discrete-time case has never been studied in detail. Therefore, this paper proposes a sliding surface, which crosses the system’s representative point at the initial step and then shifts in the state space according to the pre-generated demand profile of the sliding variable. Next, a controller for a real perturbed plant is designed so that it drives the system’s representative point to its reference position on the sliding plane in each step. Therefore, the impact of external disturbances on the system’s trajectory is minimized, which leads to a reduction of the necessary control effort. Moreover, thanks to a new reaching law applied in the reference profile generator, the sliding surface shift in each step is strictly limited and a switching type of motion occurs. Finally, under the assumption of boundedness and smoothness of continuous-time disturbance, a compensation scheme is added. It is proved that this control strategy reduces the quasi-sliding mode band-width from O(T) to O(T3) order from the very beginning of the regulation process. Moreover, it is shown that the maximum state variable errors become of O(T3) order as well. These achievements directly reduce the energy consumption in the closed-loop system, which is nowadays one of the crucial factors in control engineering.

Sign in / Sign up

Export Citation Format

Share Document