scholarly journals Technical Note: Development of 3D‐printed breast phantoms for end‐to‐end testing of whole breast volumetric arc radiotherapy

2020 ◽  
Vol 21 (8) ◽  
pp. 315-320
Author(s):  
Laurence Delombaerde ◽  
Saskia Petillion ◽  
Caroline Weltens ◽  
Robin De Roover ◽  
Truus Reynders ◽  
...  
Keyword(s):  
Technical Note ◽  
3D Printed ◽  
End To End ◽  
Breast Phantoms

OC-0021 End-to-end verification of 3D printed applicators for HDR skin brachytherapy

2021 ◽  
Vol 158 ◽  
pp. S12-S14
Author(s):  
B. Dewit ◽  
M. De Brabandere ◽  
A. Nulens ◽  
M. Christiaens ◽  
W. Crijns ◽  
...  
Keyword(s):  
3D Printed ◽  
End To End

One-step reconstruction with a 3D-printed, custom-made prosthesis after total en bloc sacrectomy: a technical note

2016 ◽  
Vol 26 (7) ◽  
pp. 1902-1909 ◽  
Author(s):  
Ran Wei ◽  
Wei Guo ◽  
Tao Ji ◽  
Yidan Zhang ◽  
Haijie Liang
Keyword(s):  
Technical Note ◽  
En Bloc ◽  
Custom Made ◽  
One Step ◽  
3D Printed

Application of a customized 3D printed reduction aid after external fixation of the femur and tibia: Technical note

2017 ◽  
Vol 13 (4) ◽  
pp. e1803 ◽  
Author(s):  
Mohamed Omar ◽  
Alexander-Nicolai Zeller ◽  
Nils-Claudius Gellrich ◽  
Majeed Rana ◽  
Christian Krettek ◽  
...  
Keyword(s):  
External Fixation ◽  
Technical Note ◽  
3D Printed

scholarly journals Technical Note: Development of a 3D printed subresolution sandwich phantom for validation of brain SPECT analysis

2016 ◽  
Vol 43 (9) ◽  
pp. 5020-5027 ◽  
Author(s):  
Ian S. Negus ◽  
Robin B. Holmes ◽  
Kirsty C. Jordan ◽  
David A. Nash ◽  
Gareth C. Thorne ◽  
...  
Keyword(s):  
Technical Note ◽  
Brain Spect ◽  
3D Printed

scholarly journals The use of custom 3D printed stereotactic frames for laser interstitial thermal ablation: technical note

2016 ◽  
Vol 41 (4) ◽  
pp. E3 ◽  
Author(s):  
Nicholas J. Brandmeir ◽  
James McInerney ◽  
Brad E. Zacharia
Keyword(s):  
Brain Biopsy ◽  
Technical Note ◽  
Specific System ◽  
First Report ◽  
Wide Acceptance ◽  
Stereotactic Frame ◽  
3D Printed ◽  
Stereotactic Method ◽  
Interstitial Thermotherapy ◽  
Room Time

Over the last several years, laser interstitial thermotherapy (LITT) has gained wide acceptance for the treatment of a myriad of cranial lesions. A wide variety of techniques for placement of the laser fiber have been reported with a spectrum of perceived benefits and drawbacks. The authors present the first report of a customized 3D printed stereotactic frame for LITT. Approximately 1 week prior to surgery, 3–4 skull fiducials were placed after each of 5 patients received a local anesthetic as an outpatient. Radiographs with these fiducials were then used to create a trajectory to the lesion that would be treated with LITT. After the plan was completed, software was used to render a customized frame. On the day of surgery, the frame was attached to the implanted skull fiducials and the LITT catheter was placed. This procedure was carried out in 5 consecutive patients. In 2 patients, a needle biopsy was also performed. Intraoperative and postoperative imaging studies confirmed the accurate placement of the LITT catheter and the lesion created. Mean operating room time for all patients was 45 minutes but only 26 minutes when excluding the cases in which a biopsy was performed. To the best of the authors' knowledge, this is the first report of the use of a specific system, the STarFix microTargeting system, for use with LITT and brain biopsy. This system offers several advantages including fast operating times, extensive preoperative planning, no need for cranial fixation, and no need for frame or fiducial placement on the day of surgery. The accuracy of the system combined with these advantages may make this a preferred stereotactic method for LITT, especially in centers where LITT is performed in a diagnostic MRI suite.

Technical Note: Immunohistochemical evaluation of mouse brain irradiation targeting accuracy with 3D‐printed immobilization device

2015 ◽  
Vol 42 (11) ◽  
pp. 6507-6513 ◽  
Author(s):  
Niloufar Zarghami ◽  
Michael D. Jensen ◽  
Srikanth Talluri ◽  
Paula J. Foster ◽  
Ann F. Chambers ◽  
...  
Keyword(s):  
Mouse Brain ◽  
Technical Note ◽  
Brain Irradiation ◽  
3D Printed ◽  
Immobilization Device ◽  
Targeting Accuracy

scholarly journals Development of a 3D-printed external ventricular drain placement simulator: technical note

2015 ◽  
Vol 123 (4) ◽  
pp. 1070-1076 ◽  
Author(s):  
Bruce L. Tai ◽  
Deborah Rooney ◽  
Francesca Stephenson ◽  
Peng-Siang Liao ◽  
Oren Sagher ◽  
...  
Keyword(s):  
3D Printing ◽  
Haptic Feedback ◽  
External Ventricular Drain ◽  
Cost Effective ◽  
Technical Note ◽  
Intracranial Pressures ◽  
3D Printed ◽  
Model Geometry ◽  
3D Scans ◽  
Simulation Systems

In this paper, the authors present a physical model developed to simulate accurate external ventricular drain (EVD) placement with realistic haptic and visual feedbacks to serve as a platform for complete procedural training. Insertion of an EVD via ventriculostomy is a common neurosurgical procedure used to monitor intracranial pressures and/or drain CSF. Currently, realistic training tools are scarce and mainly limited to virtual reality simulation systems. The use of 3D printing technology enables the development of realistic anatomical structures and customized design for physical simulators. In this study, the authors used the advantages of 3D printing to directly build the model geometry from stealth head CT scans and build a phantom brain mold based on 3D scans of a plastinated human brain. The resultant simulator provides realistic haptic feedback during a procedure, with visualization of catheter trajectory and fluid drainage. A multiinstitutional survey was also used to prove content validity of the simulator. With minor refinement, this simulator is expected to be a cost-effective tool for training neurosurgical residents in EVD placement.

Sign in / Sign up

Export Citation Format

Share Document