ECAP: Processing Fundamentals and Recent Progresses

2009 ◽  
pp. 201-215
Author(s):  
Zenji Horita
Keyword(s):  
Ecap Processing

Microstructural Design of an AlMgSi Alloy via ECAP Processing: An Advanced SPD Manufacturing Technique for NC/UFG Materials

2015 ◽  
Vol 1114 ◽  
pp. 143-148
Author(s):  
Nicolae Serban ◽  
Doina Răducanu ◽  
Vasile Danut Cojocaru ◽  
Nicolae Ghiban
Keyword(s):  
Plastic Deformation ◽  
Severe Plastic Deformation ◽  
Grain Refinement ◽  
Shape Change ◽  
Large Strain ◽  
Metallographic Analysis ◽  
Cross Sectional ◽  
Ecap Processing ◽  
Microstructural Design ◽  
Almgsi Alloy

Severe plastic deformation (SPD) has received enormous interest over the last two decades as a method capable of producing fully dense and bulk ultra-fine grained (UFG) and nanocrystalline (NC) materials. Significant grain refinement obtained by SPD leads to improvement of mechanical, microstructural and physical properties. Compared to classical deformation processes, the big advantage of SPD manufacturing techniques, represented in particular by equal channel angular pressing (ECAP) is the lack of shape-change deformation and the consequent possibility to impart extremely large strain. In ECAP processing, the workpiece is pressed through a die in which two channels of equal cross-section intersect at an angle of ϕ and an additional angle of ψ define the arc of curvature at the outer point of intersection of the two channels. As a result of pressing, the sample theoretically deforms by simple shear and retains the same cross-sectional area to allow repeated pressings for several cycles. A commercial AlMgSi alloy was investigated in our study. The specimens were processed at room temperature for multiple passes, using three different ECAP dies. All samples (ECAP processed and as-received) were subjected to metallographic analysis and mechanical testing. Several correlations between the main processing parameters and the resulting microstructural aspect and mechanical features for the processed material were established. It was shown that severe plastic deformation by means of ECAP processing can be used in aluminum alloys microstructural design as an advanced tool for grain refinement in order to attain the desired microstructure and mechanical properties.

scholarly journals Experimental and Numerical Investigation of the ECAP Processed Copper: Microstructural Evolution, Crystallographic Texture and Hardness Homogeneity

Metals ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 607
Author(s):  
A. I. Alateyah ◽  
Mohamed M. Z. Ahmed ◽  
Yasser Zedan ◽  
H. Abd El-Hafez ◽  
Majed O. Alawad ◽  
...  
Keyword(s):  
Grain Size ◽  
Equal Channel Angular Pressing ◽  
Cross Section ◽  
Room Temperature ◽  
Pure Copper ◽  
High Density ◽  
Ecap Processing ◽  
Heterogeneous Distribution ◽  
Angular Pressing ◽  
Average Grain Size

The current study presents a detailed investigation for the equal channel angular pressing of pure copper through two regimes. The first was equal channel angular pressing (ECAP) processing at room temperature and the second was ECAP processing at 200 °C for up to 4-passes of route Bc. The grain structure and texture was investigated using electron back scattering diffraction (EBSD) across the whole sample cross-section and also the hardness and the tensile properties. The microstructure obtained after 1-pass at room temperature revealed finer equiaxed grains of about 3.89 µm down to submicrons with a high density of twin compared to the starting material. Additionally, a notable increase in the low angle grain boundaries (LAGBs) density was observed. This microstructure was found to be homogenous through the sample cross section. Further straining up to 2-passes showed a significant reduction of the average grain size to 2.97 µm with observable heterogeneous distribution of grains size. On the other hand, increasing the strain up to 4-passes enhanced the homogeneity of grain size distribution. The texture after 4-passes resembled the simple shear texture with about 7 times random. Conducting the ECAP processing at 200 °C resulted in a severely deformed microstructure with the highest fraction of submicron grains and high density of substructures was also observed. ECAP processing through 4-passes at room temperature experienced a significant increase in both hardness and tensile strength up to 180% and 124%, respectively.

Effect of Heat Treatment on Mechanical Properties of ECAPed 7075 Aluminum Alloy

2013 ◽  
Vol 829 ◽  
pp. 62-66 ◽  
Author(s):  
Alireza Fallahi ◽  
Hossein Hosseini-Toudeshky ◽  
Seyed Mahmoud Ghalehbandi
Keyword(s):  
Mechanical Properties ◽  
Heat Treatment ◽  
Thermal Stability ◽  
Aluminum Alloy ◽  
Solution Treatment ◽  
7075 Aluminum Alloy ◽  
Ecap Processing ◽  
Good Thermal Stability ◽  
7075 Alloy

It is the objective of this study to investigate the effect of ECAP processing and heat treatment on the mechanical properties of the UFG 7075 alloy. Also the effect of post ECAP heat treatment is investigated. The alloy is processed by ECAP after annealing as well as solution treatment to produce an UFG structure. Furthermore mechanical properties and their variations during annealing and aging are investigated. The hardness of the pre-ECAP annealed and the pre-ECAP solutionised 7075 aluminum alloy has increased significantly compared with that of the CG sample. Also hardness of ECAPed specimen has not experienced significant changes in post-ECAP heat treatment and indicated that the alloy had approximately good thermal stability.

Effect of ECAP Processing on Hardness, Electrical Conductivity, and Precipitation Kinetics of the Cu-0.81Cr-0.07Zr Alloy

2021 ◽  
Author(s):  
Filipe Caldatto Dalan ◽  
Gisele Ferreira de Lima Andreani ◽  
Dilermando Nagle Travessa ◽  
Svetlana Faizova ◽  
Ilshat Albertovich Faizov ◽  
...  
Keyword(s):  
Electrical Conductivity ◽  
Precipitation Kinetics ◽  
Ecap Processing ◽  
Kinetics Of

Strength of Commercial Aluminum Alloys after Equal Channel Angular Pressing and Post-ECAP Processing

2006 ◽  
Vol 114 ◽  
pp. 91-96 ◽  
Author(s):  
Maxim Yu. Murashkin ◽  
M.V. Markushev ◽  
Julia Ivanisenko ◽  
Ruslan Valiev
Keyword(s):  
Mechanical Properties ◽  
Heat Treatment ◽  
Tensile Strength ◽  
Aluminum Alloys ◽  
Ultimate Tensile Strength ◽  
Equal Channel Angular Pressing ◽  
Room Temperature ◽  
Solution Treatment ◽  
Ecap Processing ◽  
Angular Pressing

The effects of equal channel angular pressing (ECAP), further heat treatment and rolling on the structure and room temperature mechanical properties of the commercial aluminum alloys 6061 (Al-0.9Mg-0.7Si) and 1560 (Al-6.5Mg-0.6Mn) were investigated. It has been shown that the strength of the alloys after ECAP is higher than that achieved after conventional processing. Prior ECAP solution treatment and post-ECAP ageing can additionally increase the strength of the 6061 alloy. Under optimal ageing conditions a yield strength (YS) of 434 MPa and am ultimate tensile strength (UTS) of 470 MPa were obtained for the alloy. Additional cold rolling leads to a YS and UTS of 475 and 500 MPa with 8% elongation. It was found that the post-ECAP isothermal rolling of the 1560 alloy resulted in the formation of a nano-fibred structure and a tensile strength (YS = 540 MPa and UTS = 635 MPa) that has never previously been observed in commercial non-heat treatable alloys.

Microstructure and mechanical properties of an Mg–10Al alloy fabricated by Sb-alloying and ECAP processing

2013 ◽  
Vol 560 ◽  
pp. 787-791 ◽  
Author(s):  
Hongxia Wang ◽  
Kangkang Zhou ◽  
Guoyin Xie ◽  
Xingzhong Liang ◽  
Wei Liang ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Ecap Processing ◽  
Microstructure And Mechanical Properties

Finite Element Simulation of Aluminum ECAP Material Flow

2013 ◽  
Vol 423-426 ◽  
pp. 267-270
Author(s):  
Jian Hui Li ◽  
Zu Jian Yu ◽  
Da Zhi Xiao ◽  
Li Ping Zhang
Keyword(s):  
Finite Element ◽  
Material Flow ◽  
Maximum Principal Stress ◽  
Metallic Materials ◽  
Rigid Plastic ◽  
Ecap Processing ◽  
Angular Pressing ◽  
Fine Grain ◽  
Corner Flow ◽  
Element Simulation

To enhancing strength and toughness of metals, severe plastic deformation (SPD) grain refinement was a typical method. As one of the SPD method, equal channel angular pressing is an effective method in fabricating ultra-fine grain metallic materials. In this paper, the rigid-plastic finite element method was used to analyze the aluminum alloy ECAP processing, to reveal the material flow character and its effect on microstructure evolution. The simulation results were agreed with plastic mechanics and experiment well, and it was shown that distribution of maximum principal stress was not uniform, material located at the front-end of sample flow easily and material located at the top of die channel corner flow difficultly.

scholarly journals Effect of ECAP processing on microstructure evolution and dynamic compressive behavior at different temperatures in an Al-Zn-Mg alloy

2017 ◽  
Vol 684 ◽  
pp. 617-625 ◽  
Author(s):  
Mohamed A. Afifi ◽  
Pedro Henrique R. Pereira ◽  
Ying Chun Wang ◽  
Yangwei Wang ◽  
Shukui Li ◽  
...  
Keyword(s):  
Microstructure Evolution ◽  
Mg Alloy ◽  
Compressive Behavior ◽  
Ecap Processing ◽  
Different Temperatures

scholarly journals Strengthening of Au and Au Alloys by ECAP Processing

2004 ◽  
Vol 68 (12) ◽  
pp. 1086-1088
Author(s):  
Tetsuyoshi Suzuki ◽  
Alexei Vinogradov ◽  
Satoshi Hashimoto
Keyword(s):  
Ecap Processing
Sign in / Sign up

Export Citation Format

Share Document