Cobalt Ferrite CoFe2O4 by a Coprecipitation Method

Author(s):  
Didik Eko Saputro ◽  
Utari Utari ◽  
Budi Purnama

<strong><span lang="EN-US">Abstract:</span></strong><span lang="EN-US"> The effect of bismuth ion substitution on the magnetic properties of cobalt ferrite nanoparticles was identified in this study. This method used in this study was coprecipitation method using 0.1 bismuth ion concentration. The results on hysteresis loop showed that the saturation magnetization of cobalt ferrite nanoparticles decreased with the substitution of bismuth ions, but the coercive field experienced the opposite. Saturation magnetization decreased from 57.97 to 51.19 emu / g, while coercive fields increased from 0.64 to 0.84 kOe.</span>


2011 ◽  
Vol 26 (5) ◽  
pp. 486-490 ◽  
Author(s):  
Quan-Wei HAN ◽  
Kun LI ◽  
Song PENG ◽  
Yu WANG ◽  
Helen Lai-Wa CHAN

2014 ◽  
Vol 900 ◽  
pp. 172-176 ◽  
Author(s):  
Ji Mei Niu ◽  
Zhi Gang Zheng

The Fe3O4 magnetic nanoparticles obtained by the aqueous coprecipitation method are characterized systematically using scanning electron microscope, X-ray diffraction and vibrating sample magnetometer. These magnetic nanoparticles are spheric, dispersive, and have average grain size of 50 nm. The size and magnetic properties of Fe3O4 nanoparticles can be tuned by the reaction temperature. All samples exhibit high saturation magnetization (Ms=53.4 emu·g-1) and superparamagnetic behavior with a block temperature (TB) of 215K. These properties make such Fe3O4 magnetic nanoparticles worthy candidates for the magnetic carriers of targeted-drug or gene therapy in future.


2021 ◽  
Vol 7 (5) ◽  
pp. 56
Author(s):  
Yimin Yang ◽  
Xiaoying Li ◽  
Ziyu Liu ◽  
Dianjun Hu ◽  
Xin Liu ◽  
...  

Nanoparticles prepared by the coprecipitation method were used as raw materials to fabricate Y3Fe5O12 (YIG) ceramics by air pressureless sintering. The synthesized YIG precursor was calcinated at 900–1100 °C for 4 h in air. The influences of the calcination temperature on the phase and morphology of the nanopowders were investigated in detail. The powders calcined at 1000–1100 °C retained the pure YIG phase. YIG ceramics were fabricated by sintering at 1200–1400 °C for 10 h, and its densification behavior was studied. YIG ceramics prepared by air sintering at 1250 °C from powders calcinated at 1000 °C have the highest in-line transmittance in the range of 1000-3000 nm. When the sintering temperature exceeds 1300 °C, the secondary phase appears in the YIG ceramics, which may be due to the loss of oxygen during the high-temperature sintering process, resulting in the conversion of Fe3+ into Fe2+.


2021 ◽  
Vol 23 (4) ◽  
Author(s):  
Bong-Gu Kim ◽  
Hyun-Hee Choi ◽  
Jung-Hun Son ◽  
SeungCheol Yang ◽  
Yun-Ki Byeun ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document