scholarly journals Three-dimensional dense distributed temperature sensing for measuring layered thermohaline systems

2016 ◽  
Vol 52 (8) ◽  
pp. 6656-6670 ◽  
Author(s):  
K. P. Hilgersom ◽  
N. C. van de Giesen ◽  
P. G. B. de Louw ◽  
M. Zijlema
Sensors ◽  
2019 ◽  
Vol 19 (22) ◽  
pp. 4993
Author(s):  
Can Zhang ◽  
ZhongXie Jin

A novel two-dimensional (2D) positioning method based on Raman distributed temperature sensing (RDTS) has been reported to dramatically improve positioning accuracy. Using a well-designed 2D distribution of optical fiber and corresponding algorithms, the heat source can be accurately located without crosstalk; however, there is a tradeoff between sensing distance and positioning accuracy. In our experiments, an RDTS system with a spatial resolution of 0.8 m along a 3 km multimode fiber (MMF) is used with specific 2D routing rules and corresponding algorithms. A positioning accuracy of about 0.1 m is obtained without hardware modification, which could be improved through the dense arrangement of fiber; however, this would sacrifice the sensing length. This solution can be used for both flat surfaces and curved surfaces such as pipes or tank surfaces. This scheme can also be extended to three-dimensional positioning using a delicate routing design of sensing fiber.


Author(s):  
Anton O. Chernutsky ◽  
Dmitriy A. Dvoretskiy ◽  
Ilya O. Orekhov ◽  
Stanislav G. Sazonkin ◽  
Yan Zh. Ososkov ◽  
...  

2021 ◽  
Vol 7 (20) ◽  
pp. eabe7136
Author(s):  
Robert Law ◽  
Poul Christoffersen ◽  
Bryn Hubbard ◽  
Samuel H. Doyle ◽  
Thomas R. Chudley ◽  
...  

Measurements of ice temperature provide crucial constraints on ice viscosity and the thermodynamic processes occurring within a glacier. However, such measurements are presently limited by a small number of relatively coarse-spatial-resolution borehole records, especially for ice sheets. Here, we advance our understanding of glacier thermodynamics with an exceptionally high-vertical-resolution (~0.65 m), distributed-fiber-optic temperature-sensing profile from a 1043-m borehole drilled to the base of Sermeq Kujalleq (Store Glacier), Greenland. We report substantial but isolated strain heating within interglacial-phase ice at 208 to 242 m depth together with strongly heterogeneous ice deformation in glacial-phase ice below 889 m. We also observe a high-strain interface between glacial- and interglacial-phase ice and a 73-m-thick temperate basal layer, interpreted as locally formed and important for the glacier’s fast motion. These findings demonstrate notable spatial heterogeneity, both vertically and at the catchment scale, in the conditions facilitating the fast motion of marine-terminating glaciers in Greenland.


Energies ◽  
2021 ◽  
Vol 14 (13) ◽  
pp. 3897
Author(s):  
Miguel Ángel González-Cagigal ◽  
Juan Carlos del-Pino-López ◽  
Alfonso Bachiller-Soler ◽  
Pedro Cruz-Romero ◽  
José Antonio Rosendo-Macías

This paper presents a procedure for the derivation of an equivalent thermal network-based model applied to three-core armored submarine cables. The heat losses of the different metallic cable parts are represented as a function of the corresponding temperatures and the conductor current, using a curve-fitting technique. The model was applied to two cables with different filler designs, supposed to be equipped with distributed temperature sensing (DTS) and the optical fiber location in the equivalent circuit was adjusted so that the conductor temperature could be accurately estimated using the sensor measurements. The accuracy of the proposed model was tested for both stationary and dynamic loading conditions, with the corresponding simulations carried out using a hybrid 2D-thermal/3D-electromagnetic model and the finite element method for the numerical resolution. Mean relative errors between 1 and 3% were obtained using an actual current profile. The presented procedure can be used by cable manufacturers or by utilities to properly evaluate the cable thermal situation.


Sign in / Sign up

Export Citation Format

Share Document