The complementary role of SMOS sea surface salinity observations for estimating global ocean salinity state

2016 ◽  
Vol 121 (6) ◽  
pp. 3672-3691 ◽  
Author(s):  
Zeting Lu ◽  
Lijing Cheng ◽  
Jiang Zhu ◽  
Renping Lin
Keyword(s):  
Sea Surface ◽  
Sea Surface Salinity ◽  
Global Ocean ◽  
Surface Salinity ◽  
Complementary Role ◽  
Ocean Salinity

scholarly journals The Role of Averaging for Improving Sea Surface Salinity Retrieval from the Soil Moisture and Ocean Salinity (SMOS) Satellite and Impact of Auxiliary Data

2007 ◽  
Vol 24 (2) ◽  
pp. 255-269 ◽  
Author(s):  
Sabine Philipps ◽  
Christine Boone ◽  
Estelle Obligis
Keyword(s):  
Soil Moisture ◽  
Sensitivity Study ◽  
Sea Surface ◽  
Sea Surface Salinity ◽  
Global Ocean ◽  
Surface Salinity ◽  
Auxiliary Data ◽  
Additional Information ◽  
Ocean Salinity

Abstract Soil Moisture and Ocean Salinity (SMOS) was chosen as the European Space Agency’s second Earth Explorer Opportunity mission. One of the objectives is to retrieve sea surface salinity (SSS) from measured brightness temperatures (TBs) at L band with a precision of 0.2 practical salinity units (psu) with averages taken over 200 km by 200 km areas and 10 days [as suggested in the requirements of the Global Ocean Data Assimilation Experiment (GODAE)]. The retrieval is performed here by an inverse model and additional information of auxiliary SSS, sea surface temperature (SST), and wind speed (W). A sensitivity study is done to observe the influence of the TBs and auxiliary data on the SSS retrieval. The key role of TB and W accuracy on SSS retrieval is verified. Retrieval is then done over the Atlantic for two cases. In case A, auxiliary data are simulated from two model outputs by adding white noise. The more realistic case B uses independent databases for reference and auxiliary ocean parameters. For these cases, the RMS error of retrieved SSS on pixel scale is around 1 psu (1.2 for case B). Averaging over GODAE scales reduces the SSS error by a factor of 12 (4 for case B). The weaker error reduction in case B is most likely due to the correlation of errors in auxiliary data. This study shows that SSS retrieval will be very sensitive to errors on auxiliary data. Specific efforts should be devoted to improving the quality of auxiliary data.

scholarly journals Improved Multifractal Fusion Method to Blend SMOS Sea Surface Salinity Based on Semiparametric Weight Function

2019 ◽  
Vol 36 (8) ◽  
pp. 1501-1520 ◽  
Author(s):  
Hengqian Yan ◽  
Ren Zhang ◽  
Gongjie Wang ◽  
Huizan Wang ◽  
Jian Chen ◽  
...  
Keyword(s):  
Weight Function ◽  
Sea Surface ◽  
Sea Surface Salinity ◽  
Global Ocean ◽  
Weight Functions ◽  
Fusion Method ◽  
Surface Salinity ◽  
In Situ Data ◽  
Ocean Salinity ◽  
Rossby Radius Of Deformation

AbstractThe multifractal fusion method has proved to be an effective algorithm to mitigate the noise of the sea surface salinity (SSS) of Soil Moisture Ocean Salinity (SMOS) mission. However, the traditional nonparametric weight function used in this method is unable to fully capture the dynamic evolution of the oceanic environment. Considering the multiscale, nonuniform, anisotropic, and flow-dependent nature of the ocean, a prototype with the so-called flexible circle (FLC) weight function or flexible ellipse (FLE) weight function with a set of predefined parameters is proposed in this paper. The improved weight functions could draw dynamic information from the sea surface temperature, Rossby radius of deformation, and surface geostrophic flow to improve the quality of the remotely sensed SSS. The validation against the in situ data indicates that the improved weight functions perform better than the traditional one with a reduced root-mean-square (RMS) and standard deviation (STD) of the differences with respect to EN 4.2.0 profiles (from 0.50 and 0.46 to 0.42 and 0.38 for FLC and 0.39 and 0.36 for FLE in the global ocean). In particular, the FLE scheme could highlight the variation of the strong currents without affecting the computational efficiency. Furthermore, this paper discusses the influences of the error distribution on the fusion results and underlines the importance of error-based adaptions for further improvements.

Ocean Salinity Aspects of the Ningaloo Niño

2021 ◽  
pp. 1
Author(s):  
Yaru Guo ◽  
Yuanlong Li ◽  
Fan Wang ◽  
Yuntao Wei
Keyword(s):  
Fresh Water ◽  
Large Scale ◽  
Southern Oscillation ◽  
Regional Climate ◽  
Ocean Model ◽  
Sea Surface ◽  
Sea Surface Salinity ◽  
Surface Salinity ◽  
Near Surface ◽  
Ocean Salinity

AbstractNingaloo Niño – the interannually occurring warming episode in the southeast Indian Ocean (SEIO) – has strong signatures in ocean temperature and circulation and exerts profound impacts on regional climate and marine biosystems. Analysis of observational data and eddy-resolving regional ocean model simulations reveals that the Ningaloo Niño/Niña can also induce pronounced variability in ocean salinity, causing large-scale sea surface salinity (SSS) freshening of 0.15–0.20 psu in the SEIO during its warm phase. Model experiments are performed to understand the underlying processes. This SSS freshening is mutually caused by the increased local precipitation (~68%) and enhanced fresh-water transport of the Indonesian Throughflow (ITF; ~28%) during Ningaloo Niño events. The effects of other processes, such as local winds and evaporation, are secondary (~18%). The ITF enhances the southward fresh-water advection near the eastern boundary, which is critical in causing the strong freshening (> 0.20 psu) near the Western Australian coast. Owing to the strong modulation effect of the ITF, SSS near the coast bears a higher correlation with the El Niño-Southern Oscillation (0.57, 0.77, and 0.70 with Niño-3, Niño-4, and Niño-3.4 indices, respectively) than sea surface temperature (-0.27, -0.42, and -0.35) during 1993-2016. Yet, an idealized model experiment with artificial damping for salinity anomaly indicates that ocean salinity has limited impact on ocean near-surface stratification and thus minimal feedback effect on the warming of Ningaloo Niño.

scholarly journals Assessing Coastal SMAP Surface Salinity Accuracy and Its Application to Monitoring Gulf of Maine Circulation Dynamics

2018 ◽  
Vol 10 (8) ◽  
pp. 1232 ◽  
Author(s):  
Semyon Grodsky ◽  
Douglas Vandemark ◽  
Hui Feng
Keyword(s):  
Soil Moisture ◽  
Gulf Of Maine ◽  
Contamination Factor ◽  
Early Spring ◽  
Sea Surface ◽  
Sea Surface Salinity ◽  
Surface Salinity ◽  
Sensor Sensitivity ◽  
Ocean Salinity ◽  
Circulation Dynamics

Monitoring the cold and productive waters of the Gulf of Maine and their interactions with the nearby northwestern (NW) Atlantic shelf is important but challenging. Although remotely sensed sea surface temperature (SST), ocean color, and sea level have become routine, much of the water exchange physics is reflected in salinity fields. The recent invention of satellite salinity sensors, including the Soil Moisture Active Passive (SMAP) radiometer, opens new prospects in regional shelf studies. However, local sea surface salinity (SSS) retrieval is challenging due to both cold SST limiting salinity sensor sensitivity and proximity to land. For the NW Atlantic, our analysis shows that SMAP SSS is subject to an SST-dependent bias that is negative and amplifies in winter and early spring due to the SST-related drop in SMAP sensor sensitivity. On top of that, SMAP SSS is subject to a land contamination bias. The latter bias becomes noticeable and negative when the antenna land contamination factor (LC) exceeds 0.2%, and attains maximum negative values at LC = 0.4%. Coastward of LC = 0.5%, a significant positive land contamination bias in absolute SMAP SSS is evident. SST and land contamination bias components are seasonally dependent due to seasonal changes in SST/winds and terrestrial microwave properties. Fortunately, it is shown that SSS anomalies computed relative to a satellite SSS climatology can effectively remove such seasonal biases along with the real seasonal cycle. SMAP monthly SSS anomalies have sufficient accuracy and applicability to extend nearer to the coasts. They are used to examine the Gulf of Maine water inflow, which displayed important water intrusions in between Georges Banks and Nova Scotia in the winters of 2016/17 and 2017/18. Water intrusion patterns observed by SMAP are generally consistent with independent measurements from the European Soil Moisture Ocean Salinity (SMOS) mission. Circulation dynamics related to the 2016/2017 period and enhanced wind-driven Scotian Shelf transport into the Gulf of Maine are discussed.

scholarly journals Small-Scale Variability in Sea Surface Salinity and Implications for Satellite-Derived Measurements

2013 ◽  
Vol 30 (11) ◽  
pp. 2689-2694 ◽  
Author(s):  
Nadya T. Vinogradova ◽  
Rui M. Ponte
Keyword(s):  
Sampling Error ◽  
In Situ Measurements ◽  
Sea Surface ◽  
Sea Surface Salinity ◽  
Small Scale ◽  
Surface Salinity ◽  
Ocean Data Assimilation ◽  
Ocean Salinity ◽  
Mean Square Difference

Abstract Calibration and validation efforts of the Aquarius and Soil Moisture and Ocean Salinity (SMOS) satellite missions involve comparisons of satellite and in situ measurements of sea surface salinity (SSS). Such estimates of SSS can differ by the presence of small-scale variability, which can affect the in situ point measurement, but be averaged out in the satellite retrievals because of their large footprint. This study quantifies how much of a difference is expected between in situ and satellite SSS measurements on the basis of their different sampling of spatial variability. Maps of sampling error resulting from small-scale noise, defined here as the root-mean-square difference between “local” and footprint-averaged SSS estimates, are derived using a solution from a global high-resolution ocean data assimilation system. The errors are mostly <0.1 psu (global median is 0.05 psu), but they can be >0.2 psu in several regions, particularly near strong currents and outflows of major rivers. To examine small-scale noise in the context of other errors, its values are compared with the overall expected differences between monthly Aquarius SSS and Argo-based estimates. Results indicate that in several ocean regions, small-scale variability can be an important source of sampling error for the in situ measurements.

scholarly journals Assimilation of SMOS Sea Surface Salinity in the Regional Ocean Model for South China Sea

2019 ◽  
Vol 11 (8) ◽  
pp. 919 ◽  
Author(s):  
Ziyao Mu ◽  
Weimin Zhang ◽  
Pinqiang Wang ◽  
Huizan Wang ◽  
Xiaofeng Yang
Keyword(s):  
South China Sea ◽  
South China ◽  
The South China Sea ◽  
Sea Surface ◽  
Sea Surface Salinity ◽  
Observation Data ◽  
The South ◽  
Surface Salinity ◽  
China Sea ◽  
Ocean Salinity

Ocean salinity has an important impact on marine environment simulations. The Soil Moisture and Ocean Salinity (SMOS) mission is the first satellite in the world to provide large-scale global salinity observations of the oceans. Salinity remote sensing observations in the open ocean have been successfully applied in data assimilations, while SMOS salinity observations contain large errors in the coastal ocean (including the South China Sea (SCS)) and high latitudes and cannot be effectively applied in ocean data assimilations. In this paper, the SMOS salinity observation data are corrected with the Generalized Regression Neural Network (GRNN) in data assimilation preprocessing, which shows that after correction, the bias and root mean square error (RMSE) of the SMOS sea surface salinity (SSS) compared with the Argo observations can be reduced from 0.155 PSU and 0.415 PSU to −0.003 PSU and 0.112 PSU, respectively, in the South China Sea. The effect is equally significant in the northwestern Pacific region. The preprocessed salinity data were applied to an assimilation in a coastal region for the first time. The six groups of assimilation experiments set in the South China Sea showed that the assimilation of corrected SMOS SSS can effectively improve the upper ocean salinity simulation.

Colder and smaller : 10 years of observations of surface salinity by SMOS, Aquarius and SMAP to study mesoscale eddies in the Southern Ocean

2020 ◽  
Author(s):  
Audrey Hasson ◽  
Cori Pegliasco ◽  
Jacqueline Boutin ◽  
Rosemary Morrow
Keyword(s):  
Soil Moisture ◽  
Southern Ocean ◽  
European Space Agency ◽  
Mesoscale Eddy ◽  
Mesoscale Eddies ◽  
Sea Surface ◽  
Sea Surface Salinity ◽  
Global Ocean ◽  
Surface Salinity ◽  
Sst Anomalies

<p>Since 2010, space missions dedicated to Sea Surface Salinity (SSS) have been providing observations with almost complete coverage of the global ocean and a resolution of about 45 km every 3 days. The European Space Agency (ESA) Soil Moisture and Ocean Salinity (SMOS) mission was the first orbiting radiometer to collect regular SSS observations from space. The Aquarius and SMAP (Soil Moisture Active-Passive) missions of the National Aeronautics and Space Administration (NASA) then reinforced the SSS observing system between mid-2011 and mid-2015 and since mid-2015, respectively.</p><p>Using the most recent SSS Climate Change Initiative project dataset merging data from the 3 missions, this study investigates the SSS signal associated with mesoscale eddies in the Southern Ocean. Eddies location and characteristics are obtained from the daily v3 mesoscale eddy trajectory atlas produced by CLS. SSS anomalies along the eddies journey are computed and compared to Sea Surface Temperature (SST) anomalies (v4 Remote Sensing Systems) as well as the SubAntarctic Front (SAF) position (CTOH, LEGOS). The vertical structure of the eddies is further investigated using profiles from colocated Argo autonomous floats.<span> </span></p><p>This study highlights a robust signal in SSS depending on both the eddies rotation (cyclone/anticyclone) and latitudinal position with respect to the SAF. Moreover, this dependence is not found in SST. These observations reveal oceanic the interaction of eddies with the larger scale ocean water masses. SSS and SST anomalies composites indeed show different patterns either bi-poles linked with horizontal stirring of fronts, mono-poles from trapping water or vertical mixing changes, or a mix of the two.</p><p>This analysis gives strong hints for the erosion of subsurface waters, such as mode waters, induced by enhanced mixing caused by the deep-reaching eddies of the southern ocean.</p>

Validation and correction of sea surface salinity retrieval from SMAP

2020 ◽  
Author(s):  
Sisi Qin
Keyword(s):  
Soil Moisture ◽  
In Situ Measurements ◽  
Sea Surface ◽  
Sea Surface Salinity ◽  
Surface Salinity ◽  
Tropical Regions ◽  
Ocean Salinity ◽  
Forecast Models ◽  
Level 3

<p>In this study, Sea Surface Salinity (SSS) Level 3 (L3) daily product derived from Soil Moisture Active Passive (SMAP) during the year 2016, was validated and compared with SSS daily products derived from Soil Moisture and Ocean Salinity (SMOS) and in-situ measurements. Generally, the Root Mean Square Error (RMSE) of the daily SSS products is larger along the coastal areas and at high latitudes and is smaller in the tropical regions and open oceans. Comparisons between the two types of daily satellite SSS product revealed that the RMSE was higher in the daily SMOS product than in the SMAP, whereas the bias of the daily SMOS was observed to be less than that of the SMAP when compared with Argo floats data. In addition, the latitude-dependent bias and RMSE of the SMAP SSS were found to be primarily influenced by the precipitation and the Sea Surface Temperature (SST).Then, aregression analysis method which has adopted the precipitation and SST data was used to correct the larger bias of the daily SMAP product. It was confirmed that the corrected daily SMAP product could be used for assimilation in high-resolution forecast models, due to the fact that it was demonstrated to be unbiased and much closer to the in-situ measurements than the original uncorrected SMAP product.</p>

High-resolution sea surface salinity and temperature in coastal areas from Sentinel-2 and Copernicus Marine in situ data

2020 ◽  
Author(s):  
Encarni Medina-Lopez
Keyword(s):  
Neural Network ◽  
High Resolution ◽  
Sea Surface ◽  
Sea Surface Salinity ◽  
Global Ocean ◽  
Surface Salinity ◽  
In Situ Data ◽  
The Neural Network ◽  
Sentinel 2

<p>The aim of this work is to obtain high-resolution values of sea surface salinity (SSS) and temperature (SST) in the global ocean by using raw satellite data (i.e., without any band data pre-processing or atmospheric correction). Sentinel-2 Level 1-C Top of Atmosphere (TOA) reflectance data is used to obtain accurate SSS and SST information. A deep neural network is built to link the band information with in situ data from different buoys, vessels, drifters, and other platforms around the world. The neural network used in this paper includes shortcuts, providing an improved performance compared with the equivalent feed-forward architecture. The in situ information used as input for the network has been obtained from the Copernicus Marine In situ Service. Sentinel-2 platform-centred band data has been processed using Google Earth Engine in areas of 100 m x 100 m. Accurate salinity values are estimated for the first time independently of temperature. Salinity results rely only on direct satellite observations, although it presented a clear dependency on temperature ranges. Results show the neural network has good interpolation and extrapolation capabilities. Test results present correlation coefficients of 82% and 84% for salinity and temperature, respectively. The most common error for both SST and SSS is 0.4 C and 0.4 PSU. The sensitivity analysis shows that outliers are present in areas where the number of observations is very low. The network is finally applied over a complete Sentinel-2 tile, presenting sensible patterns for river-sea interaction, as well as seasonal variations. The methodology presented here is relevant for detailed coastal and oceanographic applications, reducing the time for data pre-processing, and it is applicable to a wide range of satellites, as the information is directly obtained from TOA data.</p>

scholarly journals Sea Surface Salinity Short Term Variability in the Tropics

2021 ◽  
Author(s):  
Frederick Bingham ◽  
Susannah Brodnitz
Keyword(s):  
Ocean Model ◽  
Sea Surface ◽  
Sea Surface Salinity ◽  
Global Ocean ◽  
Satellite Measurement ◽  
Validation Process ◽  
Short Term ◽  
Surface Salinity ◽  
Using Data ◽  
Short Term Variability

Abstract. Using data from the Global Tropical Moored Buoy Array we study the validation process for satellite measurement of sea surface salinity (SSS). We compute short-term variability (STV) of SSS, variability on time scales of 5–14 days. It is meant to be a proxy for subfootprint variability as seen by a satellite measuring SSS. We also compute representation error, which is meant to mimic the SSS satellite validation process where footprint averages are compared to pointwise in situ values. We present maps of these quantities over the tropical array. We also look at seasonality in the variability of SSS and find which months have maximum and minimum amounts. STV is driven at least partly by rainfall. Moorings exhibit larger STV during rainy periods than non-rainy ones. The same computations are also done using output from a high-resolution global ocean model to see how it might be used to study the validation process. The model gives good estimates of STV, in line with the moorings, though tending to have smaller values.

Sign in / Sign up

Export Citation Format

Share Document