scholarly journals Continuous Fiber Ceramic Composites

2004 ◽  
pp. 89-128 ◽  
Author(s):  
James K. Wessel
Keyword(s):  
Ceramic Composites ◽  
Continuous Fiber

scholarly journals Applications of Continuous Fiber Reinforced Ceramic Composites in Military Turbojet Engines

1996 ◽  
Author(s):  
Patrick Spriet ◽  
Georges Habarou
Keyword(s):  
Weight Ratio ◽  
Ceramic Matrix Composites ◽  
Thermodynamic Cycle ◽  
Ceramic Composites ◽  
Matrix Composites ◽  
Fiber Reinforced ◽  
Continuous Fiber ◽  
Operating Life ◽  
Performance Improvements ◽  
Temperature Capability

Over the last twenty years, significant performance improvements of turbojet engines have been achieved by optimizing engine thermodynamic cycle along with the introduction of new materials providing higher temperature capability and weight reduction. Metal Matrix Composites (MMC) and Ceramic Matrix Composites (CMC) are candidate material systems to meet the required thrust-to-weight ratio of 15 or higher. Continuous fiber reinforced ceramic composites, which have been developed by SEP for more than 15 years for thermostructural applications in oxidative environment, aim at increased operating temperature over superalloys and intermetallic alloys. This paper is a review of the main CMC component demonstrations performed by SEP over the last 10 years for turbojet engines along with an analysis of consequences on materials development and design methodology. The development status of a new thermostructural material specifically developed for turbojet environment with the prospect of higher design stress allowables and longer operating life at high temperature is presented.

Burner Rig Thermal Fatigue Failure of SiC Continuous Fiber/Si3N4 Ceramic Composites

1994 ◽  
Vol 365 ◽  
Author(s):  
T. Ertürk ◽  
K. Park ◽  
C. Sung
Keyword(s):  
Fatigue Failure ◽  
Thermal Fatigue ◽  
Thermal Stresses ◽  
Ceramic Composites ◽  
Columnar Structure ◽  
Fatigue Properties ◽  
Continuous Fiber ◽  
Sic Fiber ◽  
Transmission Electron ◽  
Fiber Matrix

ABSTRACTThe burner rig thermal fatigue properties of SiC continuous fiber/Si3N4 ceramic composites were examined under impinged jet fuel flame, a constant applied tensile stress and thermal cycling in the temperature range 500-1350 °C. The SCS-9 SiC fiber/Si3N4 composites failed within the flame impinged zone, whereas the SCS-6 fiber/Si3N4 composites failed outside the flame impinged zone due to the high thermal stresses resulting from high-temperature gradients. Analytical transmission electron microscopy was used to investigate the microstructure and chemistry of the fiber, matrix and fiber/matrix interface in the failed SCS-9 SiC fiber/Si3N4 composites. The partial degradation of columnar structure of the fiber was interpreted as the dominant mechanism of burner rig thermal fatigue failure of SCS-9 SiC fiber/Si3N4 composites.

Sign in / Sign up

Export Citation Format

Share Document