Bioprocess Scale-up: SMB as a Promising Technique for Industrial Separations Using IMAC

Thin Film Deposition: Solution Based Approach

10.5772/intechopen.94455 ◽

2021 ◽

Author(s):

Kashif Tufail Chaudhary

Keyword(s):

Thin Film ◽

Thin Films ◽

Inkjet Printing ◽

High Efficiency ◽

Scale Up ◽

Thin Film Deposition ◽

Dip Coating ◽

Film Deposition ◽

Promising Technique ◽

Thin Film Fabrication

The wet chemical processing opens the way to deposit thin film with the versatility and ease for a variety of materials. Liquid film deposition involves the application of a liquid precursor on a substrate which is then converted to the required coating material in a subsequent post-treatment step. Different non-vacuum solution based deposition techniques have been developed to grow thin films with high efficiency and functionality. Spin coating is one of an effective technique for thin film fabrication due to low cost, uniformity, less hazardous, and capability of easy scaling up. The typical process involves depositing a small amount of a fluid onto the center of a substrate and then spinning the substrate at high speed. Dip coating is another simple, cost effective route with feasibility to scale-up for commercial production. The dip coating process can be divided into three important technical stages, immersion, withdrawal and evaporation. The coating may be subjected to further heat treatment in order to burn out residual compounds and induce crystallization of the functional oxides. Spray coating is a promising technique to grow thin film in research and industry to prepare thin and thick films. It is an easy approach to fabricate thin film with uniform distribution at small scale from a few nanometers to micrometers in thickness. Inkjet printing is the emerging promising technique to develop large-scale, and flexible thin films. The inkjet printing process allow easy customization to grow variety of complex structures.

Download Full-text

NiAl precipitation in Fe-12w/o Cr-5w/o Ni-4w/o Al

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s042482010007480x ◽

1983 ◽

Vol 41 ◽

pp. 202-203

Author(s):

L.E. Murr ◽

J.S. Dunning ◽

S. Shankar

Keyword(s):

Solid Solution ◽

Stainless Steel ◽

Stainless Steels ◽

Alloy Composition ◽

Chromium Content ◽

Scale Up ◽

Optical Metallography ◽

Property Evaluation ◽

310 Stainless Steel ◽

Microstructural Studies

Aluminum additions to conventional 18Cr-8Ni austenitic stainless steel compositions impart excellent resistance to high sulfur environments. However, problems are typically encountered with aluminum additions above about 1% due to embrittlement caused by aluminum in solid solution and the precipitation of NiAl. Consequently, little use has been made of aluminum alloy additions to stainless steels for use in sulfur or H2S environments in the chemical industry, energy conversion or generation, and mineral processing, for example.A research program at the Albany Research Center has concentrated on the development of a wrought alloy composition with as low a chromium content as possible, with the idea of developing a low-chromium substitute for 310 stainless steel (25Cr-20Ni) which is often used in high-sulfur environments. On the basis of workability and microstructural studies involving optical metallography on 100g button ingots soaked at 700°C and air-cooled, a low-alloy composition Fe-12Cr-5Ni-4Al (in wt %) was selected for scale up and property evaluation.

Download Full-text

EXELFS Studies of Carbon Fibers

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100133953 ◽

1990 ◽

Vol 48 (2) ◽

pp. 72-73

Author(s):

V. Serin ◽

K. Hssein ◽

G. Zanchi ◽

J. Sévely

Keyword(s):

Carbon Fibers ◽

Energy Analysis ◽

Electron Excitation ◽

Complex Structures ◽

High Modulus ◽

Promising Technique ◽

X Ray ◽

Fine Structures ◽

X Ray Absorption

The present developments of electron energy analysis in the microscopes by E.E.L.S. allow an accurate recording of the spectra and of their different complex structures associated with the inner shell electron excitation by the incident electrons (1). Among these structures, the Extended Energy Loss Fine Structures (EXELFS) are of particular interest. They are equivalent to the well known EXAFS oscillations in X-ray absorption spectroscopy. Due to the EELS characteristic, the Fourier analysis of EXELFS oscillations appears as a promising technique for the characterization of composite materials, the major constituents of which are low Z elements. Using EXELFS, we have developed a microstructural study of carbon fibers. This analysis concerns the carbon K edge, which appears in the spectra at 285 eV. The purpose of the paper is to compare the local short range order, determined by this way in the case of Courtauld HTS and P100 ex-polyacrylonitrile carbon fibers, which are high tensile strength (HTS) and high modulus (HM) fibers respectively.

Download Full-text

CBED analysis of impurity distributions in AlN

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100174205 ◽

1990 ◽

Vol 48 (4) ◽

pp. 214-215

Author(s):

Daniel Callahan ◽

G. Thomas

Keyword(s):

Aluminum Nitride ◽

Bulk Material ◽

Strong Dependence ◽

Lattice Parameter ◽

Promising Technique ◽

Nitride Ceramics ◽

Surface Phases ◽

Convergent Beam ◽

Oxygen Impurities

Oxygen impurities may significantly influence the properties of nitride ceramics with a strong dependence on the microstructural distribution of the impurity. For example, amorphous oxygen-rich grain boundary phases are well-known to cause high-temperature mechanical strength degradation in silicon nitride whereas solutionized oxygen is known to decrease the thermal conductivity of aluminum nitride. Microanalytical characterization of these impurities by spectral methods in the AEM is complicated by reactions which form oxygen-rich surface phases not representative of the bulk material. Furthermore, the impurity concentrations found in higher quality ceramics may be too low to measure by EDS or PEELS. Consequently an alternate method for the characterization of impurities in these ceramics has been investigated.Convergent beam electron diffraction (CBED) is a promising technique for the study of impurity distributions in aluminum nitride ceramics. Oxygen is known to enter into stoichiometric solutions with AIN with a consequent decrease in lattice parameter.

Download Full-text